DWX-42W Wet Dental Mill
Setting up the USB camera
Instructions on how to set up a webcam using VPanel
Camera must be purchased separately.
USB connectivity supports 640 × 480 to 1280 × 720 pixels.
Example: Logitech C922 PRO, etc.
Attach to the machine
Install the USB camera at the upper part of the machine’s window so that the camera can project the milling area.
Temporarily fix the camera cable with a cable clamp, etc., so that the cable is not caught by the front cover.
Open and close the front cover, and fix the cable at the position that the cable is not caught by the front cover.
Click the camera icon
Click the camera icon on VPanel.
Select a camera
Select a USB camera and check that the image is displayed.
Camera position adjustment
Adjust the position of the camera by watching the images.
Display during recording
When the machine starts milling, the color of the camera mark turns red, and recording starts.
May 27, 2022