Article | Roland
Knowledge Base Article

DWX-4 4-Axis Dental Milling Machine

Title
"101E-000*" The % milling bur might be broken
Summary
"101E-000*" The % milling bur might be broken. The milling bur stocker number (1 to 7) is displayed for %.
Details
Situation/Error Cause 1 Procedure
  1. Hold down the operation button on the built-in panel.This will clear the error.
  2. Replace the milling bur with a new one.
  3. Perform collet maintenance. "P. 44 "Collet Maintenance, Cleaning of Dummy Pin, and Checking of Coolant Flow Rate"

Situation/Error Cause 2
  • The milling conditions are too strict
Procedure
  1. Hold down the operation button on the built-in panel. This will clear the error.
  2. Review the CAM settings and the shape specified in the CAD data.

If the Error Occurs Again
  1. The collet has worn out, leading to a decrease in its retention capabilities
Procedure
  1. Replace the collet. "P. 83 "Replacing the Collet"
  2. Perform automatic correction. "P. 56 "Correcting the Milling Machine"
Modified
April 30, 2020