CAMM-1 GX-24 24" Vinyl Cutter Knowledge Base Article | Roland DGA
Knowledge Base Article

CAMM-1 GX-24 24" Vinyl Cutter

Title
GX-24 Motor Error
Summary
My GX-24 shows a motor error on the display
Details
Symptom
​My GX-24 shows a motor error on the display.

Cause
​A heavy load occured during cutting.

Solution
A heavy load was placed on the motor, and the operation stopped. Check the media supply in the back of the cutter to make sure it feeds properly.
 Turn off the power, lower the loading lever, and load the material again.
Reference:Loading the Material
Modified
May 11, 2020