DWX-52DCi 5-axis Dental Mill with Automatic Disc Changer | Roland DGA
Technical Support for

DWX-52DCi 5-Axis Dental Milling Machine With Automatic Disc Changer


Featured Articles
How many teeth can I mill out of one zirconia disc?
How often should I change a tool?
Missing Software
Roland Product End of Life Policy
Why is the dust collector necessary?


Search DWX-52DCI Documents & Knowledge Base Articles



Expand All | Collapse All
Windows 10, Windows 8, Windows 7
Dental Driver for DWX-52D, DWX-52DCi DWX-42W. Version 1.32. Contains drivers for both 32 Bit and 64 Bit. Supports Windows 7, 8.1 10. WINX64 is 64 bit folder. WINX86 is 32 Bit folder.
12.53 MB
Firmware Ver.1.41Main V140, Changer V210 Please download the execute file and follow the Users manual. This enables you to install the latest firmware to the machine.
2.32 MB
Firmware Ver.1.30 Please download the execute file and follow the Users manual. This enables you to install the latest firmware to the machine.
2.30 MB
Firmware Ver.1.50 combined with Main Firmware V150 and Changer Firmware V210 Please download the execute file and follow the Users manual. This enables you to install the latest firmware to the machine.
2.32 MB
This document describes how to replace the collet for the DWX-50, DWX-4, DWX-51D, DWX-52D, DWX-52DC DWX-52DCi The collet should never be removed unless replacement is necessaryPlease see Collet Maintenance for tightening instructions.
791.37 KB
These instructions will guide you through replacing the spindle motor on the DWX-51D, DWX-52D, DWX-52DC DWX-52DCi models. The part number for this spindle is ZS-4D
2.23 MB
Thise guide will show you how to install and use this cleaning tool on the DWX-52DC DWX-52DCi models
296.79 KB
DWX-52DCi Checking items before milling and Maintenance - French
712.14 KB
User Manual to properly operate and maintain the DWX-52DCi.
9.38 MB
BOFA DustPRO Base Manual DWX
720.01 KB
BOFA DustPRO universal users Manual
619.68 KB
DWX-52DCi Accessories
247.35 KB
This guide will walk you through the steps to download, install, setup, and use DWINDEX performance software.
1.43 MB
This setup guide will walk users through the installation and setup steps for proper installation of the DWX-52DCi.
8.34 MB
MillBox CAM software updates.
44.82 KB
This download will install DWINDEX onto your computer.
69.34 MB
This download is the latest version of DWINDEX software. DWINDEX tracks mill, material, and tool untilization for DWX-52DCi and DWX-52DC milling devices.
2.48 MB
This update grants access to the denture time reduction kit module in MillBox CAM software for DWX-52DCi users. V4 dated 8162019
79.06 MB
This update grants access to the model time reduction kit module in MillBox CAM software for DWX-52DCi users.
26.43 MB
This is an installer program for VPanel for DWX-52D, DWX-52DC, DWX-52DCi, DWX-42W. Download the exe file, and double-click setup.exe and follow the instructions as displayed for installation.
137.53 MB
This is an installer program for VPanel for DWX-52D, DWX-52DC, DWX-52DCi, DWX-42W. Download the exe file, and double-click setup.exe and follow the instructions as displayed for installation.
146.05 MB
This is an installer program for VPanel for DWX-52D, DWX-52DC, DWX-52DCi, DWX-42W. Double-click setup.exe and follow the instructions as displayed for installation. Win10 / 8.1. Software supports 32-bit version of Windows. In 64-bit version of Windows
149.69 MB
YouTube portal for Global DGSHAPE Video Content
48.85 KB
Walk-through of how to perform cleaning of your DWX-52DCi after the milling is completed.
35.65 KB
This procedure will guide you on how to mount the 98.5mm disc to the adaptor.
35.64 KB
This procedure will guide you on how to mount the pin type workpiece to the adaptor.
35.49 KB
Walk-through of how to perform cleaning of your DWX-52DCi and performing Auto Correction
35.66 KB
Dental Driver 2, VPanel for DWX, DWX052DC Manuals
83.48 MB
Any issues with heavy usage?
HELP!! I can't find the driver I need for my Roland!
The cut path is being clipped on one side of the print
DWX-52D Spindle Unit Replacement dgs
Error "101D-0010" The cleaning tool cannot be released.
Error Code "****_****" An unknown error occurred.
Error Code "1000-XXXX" The % limit switch was not found.
Error Code "1006-02" The % axis position has been shifted.
Error Code "1017-0000" The front cover was opened.
Error Code "1017-0001" The front cover or the magazine cover was opened.
Error Code "101C-0000" The milling bur sensor was not found.
Error Code "101D-****" The milling bur cannot be released.
Error Code "101E-****" The % milling bur might be broken.
Error Code "101F-****" The % milling bur chucking has slipped out.
Error Code "1020/1021-****" The % milling bur is too long./The % milling bur is too short.
Error Code "1022-****" The % milling bur was not found.
Error Code "1022-0010" The cleaning tool was not found.
Error Code "1023-0000 to 1028-0000" Milling data error.
Error Code "1029-0000" The spindle experienced an overload.
Error Code "102A-0000" The spindle experienced overcurrent.
Error Code "102B-0000" The spindle motor temperature is too high.
Error Code "102D-0000" The spindle cannot be turned.
Error Code "102E-0000" The spindle has collided with the rotary axis unit
Error Code "102E-0001" The changer has collided with the adapter.
Error Code "1030-0000" The dust collector is not working.
Error Code "103B-0000" The automatic correction is not yet finished.
Error Code "103D-0000" Milling data error. The milling bur cannot reach the milling position.
Error Code "1047-****" The machine's internal memory cannot be accessed.
Error Code "1049-****" The adapter with ID number % cannot be released.
Error Code "104A-****"The adapter with ID number % could not be grasped.
Error Code "104B-00**" The adapter with ID number % was not found.
Error Code "104D-00**" An adapter with the same ID was found.
Error Code "104E-****" The % limit switch was not found.
Error Code "104F-02**" The % axis position has been shifted.
Error Code "1050-****" The operation to read a bar code failed.
Looking for general information on tool life
What steps should I take prior to running a milling job?
HELP!! I lost the software CD for my machine!!
Information about my legacy product
Can I use either of these cleaning cartridges interchangeably?
When outputting a design to your engraver or milling machine, the software needs to be able to translate commands to the device. These commands tell the machine how fast to mill, at what revolutions per minute (RPM), and where to mill in 3D space. This is what makes up a toolpath. A Strategy is a combination of tool movements, material properties, software algorithms, and tool characteristics.
Do I really need to purchase this accessory item?