Article | Roland
Knowledge Base Article

DWX-52D 5-Axis Dental Milling Machine

Title
Error Code "103B-0000"
Summary
Error Code "103B-0000" The automatic correction is not yet finished.
Details
Cause #1
  • Automatic correction has not been performed.
  • Automatic correction was cancelled before it could finish, and the machine was left in the state.
  • Automatic correction was not performed after updating the firmware to a version that required automatic correction to be performed again.
Solution
  1. Hold down the operation button on the built-in panel.
    1. This will clear the error.
  2. Perform automatic correction.
    1. Refer to User Manual P. 65 "Correcting the Milling Machine".
Cause #2
The VPanel and machine firmware versions may not match.

Solution
Download the latest versions of VPanel and the machines' firmware, then install these versions.
www.dgshape.com

Modified
April 10, 2020