Article | Roland
Knowledge Base Article

DWX-52D 5-Axis Dental Milling Machine

Title
Compressed Air Does Not Come Out
Summary
Compressed Air Does Not Come Out
Details
Does the operation require compressed air?
Compressed air is only supplied during some operations, such as when the spindle is rotating or when replacing the milling bur.

Is the regulator properly connected and are the pressure settings correctly configured?
Check the connection. Check that the pressure has been set to 0.2 MPa. If the set pressure of the regulator is zero, compressed air will not be supplied. User's Manual Page 40

Is the knob at the bottom of the regulator open?
The compressed air will escape if the knob at the bottom of the regulator is open. User's Manual Page 62
Modified
April 28, 2020