Picza LPX-600RE 3D Laser Scanner Knowledge base Article | Roland DGA
Knowledge Base Article

Picza LPX-600RE 3D Laser Scanner

Title
Cut Paths Are Being Clipped
Summary
The cut path is being clipped on one side of the print
Details

Symptom
The cut path is being clipped on one side of the print

Cause
​EPS Margin not set

Solution
​Set EPS Margin to .10  In VersaWorks, click on the edit tab. open queue settings and adjust the EPS margin at the top of the interface to 0.10
Modified
March 05, 2020