Heat transfer media does not adhere to fabric properly.
I need a clear film that is compatible with my eco-solvent printer that I can print film positives.
Chart of color products (EcoSol/UV/Sublimation) that includes the various configurations, ink types and part numbers for ink. This article has been optimized for Mobile viewing.
HELP!! Ilost the software CDfor my machine!!
My Roland printer is reading the full width of the platen bed even though I loaded a smaller roll
General information about OnSupport
Why do some of my prints on textiles look washed out and others don't?
HTM2 peels off in sections after laundering.
Some customers have expressed interest in returning to origin on print only devices send multiples passesand maximize opacity on transparent medias.
TheRF-640 Prints on Media Clamp.
Question - Can the RF-640 support an 8 color mode in addition to dual CMYK?
Can I use either of these cleaning cartridges interchangeably?
This document provides the correct TU, HU and BU models for the various printer models where applicable.
FAQ for VersaWorks 6 - Includes supported devices, computer requirements and downloading/installing information.
Interested in upgrading to VersaWorks 6
Versaworks will not print jobs concurrently whenset up withmore than one machine.
When outputting a design to your printer, the software needs to be able to translate commands to the device (such as how much ink to fire and when). These commands tell the machine how fast to feed the material, at what speed the print carriage travels, and what heat settings are needed for the print platen. Other variables include theproperties of thematerial being printed on, how the ink chemsitry reacts to it, how the different process colors of ink blend together to form other colors, and how long the print takes to dry. A Profile is a combination of all of these variables, among others.