DWX-51D 5 Axis Dental Mill | Roland DGA
Expand All | Collapse All
Windows 10
This document (PDF) lists instructions of how to install Roland drivers on Windows 10.
1.67 MB
OS Compatibility List
27.89 KB
Windows 7
Driver for Windows 7 Ver. 1.70 (32-bit Only)
2.83 MB
Driver for Windows 7 ver. 1.70 (64-bit Only)
3.24 MB
Windows 8
Driver for Windows 8 ver. 1.70 (32-bit Only)
2.87 MB
Driver for Windows 8 ver. 1.70 (64-bit Only)
3.28 MB
Windows Vista
Driver for Windows Vista ver. 1.70 (32-bit Only)
2.81 MB
Driver for Windows Vista ver. 1.70 (64-bit Only)
3.24 MB
Firmware 1.50 provides support for the Baltic Denture System.
2.16 MB
This document describes how to replace the collet for the DWX-50, DWX-4, DWX-51D, DWX-52D, DWX-52DC & DWX-52DCi *****The collet should never be removed unless replacement is necessary****Please see "Collet Maintenance" for tightening instructions.
791.37 KB
This document will show you how to replace the spindle belt. ZSB-140 is the belt for the DWX-4 and ZSB-170 is for DWX-51D, DWX-52D, DWX-52DC & DWX-52DCi Dental mill.
2.05 MB
These instructions will guide you through replacing the spindle motor on the DWX-51D, DWX-52D, DWX-52DC & DWX-52DCi models. The part number for this spindle is ZS-4D
2.23 MB
DWX-51D User Manual for proper maintenance and usage of the mill
8.28 MB
16 page users manual
720.01 KB
16 page users manual on the stand alone BOFA unit
619.68 KB
Step by step guide for end user to replace spindle component.
1.02 MB
This document discusses Roland DGA's Depot Repair Policies
183.62 KB
Latest version of the Setup/Installation Guide for the DWX-51D.
5.20 MB
Most Roland devices are supplied with a one year standard manufacturer’s warranty, but by registering your device within 60 days of purchase, your product could qualify for an extended warranty of up to 3 years*.
31.01 KB
VPanel 1.40 provides support for the Baltic Denture System.
1.82 MB
Walk-through of how to perform cleaning of your DWX-51D after the milling is completed.
27.08 KB
This video will guide you through cleaning the important calibration points first and then performing the auto correction procedure
28.02 KB
This video will guide you through replacing the collet on the DWX-51D and then performing the Auto Calibration procedure using the Vpanel
28.14 KB
Want to get the highest quality results from your DWX-51D Dental Mill? Making the right choices when setting up your dental milling project can make all the difference in the quality of output.
26.87 KB
This video will guide you through how to prepare the tool or bur before installing.
28.05 KB
This video will guide you through tightening the collet
27.96 KB
This video will guide you through replacing the spindle unit
27.93 KB
Get the most value out of your dental milling tools. We take a look at the most popular dental tools being used with Roland Dental Milling devices.
26.15 KB
Follow this link to the Roland Academy Webinars On-Demand webpage. Then filter through the videos to find a training session that suits your needs.
31.11 KB
​What steps should I take prior to running a milling job?
​Looking for general information on tool life
​Any issues using composite resin blocks?
​Making sure I hold the required tool dimensions
​Seeking information about NC Code & G code
I would like to know what the recommended materials are for this model
​Do I really need to purchase this accessory item?
​Any issues with heavy usage?
Expand All | Collapse All
Windows 10
This document (PDF) lists instructions of how to install Roland drivers on Windows 10.
1.67 MB
OS Compatibility List
27.89 KB
Windows 7
Driver for Windows 7 Ver. 1.70 (32-bit Only)
2.83 MB
Driver for Windows 7 ver. 1.70 (64-bit Only)
3.24 MB
Windows 8
Driver for Windows 8 ver. 1.70 (32-bit Only)
2.87 MB
Driver for Windows 8 ver. 1.70 (64-bit Only)
3.28 MB
Windows Vista
Driver for Windows Vista ver. 1.70 (32-bit Only)
2.81 MB
Driver for Windows Vista ver. 1.70 (64-bit Only)
3.24 MB
Firmware 1.50 provides support for the Baltic Denture System.
2.16 MB
This document describes how to replace the collet for the DWX-50, DWX-4, DWX-51D, DWX-52D, DWX-52DC & DWX-52DCi *****The collet should never be removed unless replacement is necessary****Please see "Collet Maintenance" for tightening instructions.
791.37 KB
This document will show you how to replace the spindle belt. ZSB-140 is the belt for the DWX-4 and ZSB-170 is for DWX-51D, DWX-52D, DWX-52DC & DWX-52DCi Dental mill.
2.05 MB
These instructions will guide you through replacing the spindle motor on the DWX-51D, DWX-52D, DWX-52DC & DWX-52DCi models. The part number for this spindle is ZS-4D
2.23 MB
DWX-51D User Manual for proper maintenance and usage of the mill
8.28 MB
16 page users manual
720.01 KB
16 page users manual on the stand alone BOFA unit
619.68 KB
Step by step guide for end user to replace spindle component.
1.02 MB
This document discusses Roland DGA's Depot Repair Policies
183.62 KB
Latest version of the Setup/Installation Guide for the DWX-51D.
5.20 MB
Most Roland devices are supplied with a one year standard manufacturer’s warranty, but by registering your device within 60 days of purchase, your product could qualify for an extended warranty of up to 3 years*.
31.01 KB
VPanel 1.40 provides support for the Baltic Denture System.
1.82 MB
Walk-through of how to perform cleaning of your DWX-51D after the milling is completed.
27.08 KB
This video will guide you through cleaning the important calibration points first and then performing the auto correction procedure
28.02 KB
This video will guide you through replacing the collet on the DWX-51D and then performing the Auto Calibration procedure using the Vpanel
28.14 KB
Want to get the highest quality results from your DWX-51D Dental Mill? Making the right choices when setting up your dental milling project can make all the difference in the quality of output.
26.87 KB
This video will guide you through how to prepare the tool or bur before installing.
28.05 KB
This video will guide you through tightening the collet
27.96 KB
This video will guide you through replacing the spindle unit
27.93 KB
Get the most value out of your dental milling tools. We take a look at the most popular dental tools being used with Roland Dental Milling devices.
26.15 KB
Follow this link to the Roland Academy Webinars On-Demand webpage. Then filter through the videos to find a training session that suits your needs.
31.11 KB
​What steps should I take prior to running a milling job?
​Looking for general information on tool life
​Any issues using composite resin blocks?
​Making sure I hold the required tool dimensions
​Seeking information about NC Code & G code
I would like to know what the recommended materials are for this model
​Do I really need to purchase this accessory item?
​Any issues with heavy usage?