Knowledge Base Article
TrueVIS VG2-640 64" Eco-Solvent Printer/Cutter
Title
Temperature is too high message
Summary
The printer display is showing a temperature toohigh warning
Details
Symptom
The printer display is showing a temperature too high warning
Cause
This is based on the current room temperature near the printer. The printer has an on board sensor that is reading a temperature above the proper operating range.
Solution
Turn off the sub power at the control panel. Lower the room temperature to at no higher than 32 degrees C or 90 degrees F.
The printer display is showing a temperature too high warning
Cause
This is based on the current room temperature near the printer. The printer has an on board sensor that is reading a temperature above the proper operating range.
Solution
Turn off the sub power at the control panel. Lower the room temperature to at no higher than 32 degrees C or 90 degrees F.
The operating range is 20 to 32° C or (68 to 90°F).
Modified
April 09, 2020