Article | Roland
Knowledge Base Article

TrueVIS VG2-640 64" Eco-Solvent Printer/Cutter

Title
TU4 Added Functionality for Improved Stabilization
Summary
Explanation of the Tension Mode on the TU4 Take Up Assembly. This article describes the "slacking" method of media stabilization.
Details
TU4 Added Functionality for Improved Stabilization
 
Dealers and customers may ask about the third switch (Tension vs Standard) on the TU4 assembly that works with the VG2 and SG2 model printers. 

The diagram below details how the media take up is delayed after the dancer bar trips the lower sensor. By slacking the media, the distortion caused by the roller bar is reset which helps stabilize the media at the TU.


Modified
December 11, 2019