DWX-52DC 5-Axis Dental Milling Machine With Automatic Disc Changer
Proper maintenance and care of the Detection pins is vital to ensuring the performance of the mill.
Use the included cloth for care to wipe clean detection pin.
Load the detection pin in the ATC magazine's number 15 position.
Attaching the Detection Pin to the Bur holder
Items that you will need
Using the Calipers check the Measurements
Detection Pin Dimensions
In case that you don't have calipers, you can use the Milling bur positioner to align the Pin.
Align the round top side of the Pin to the edge of the large opening on the Positioner.
If the Pin is substantially out of range, an error message will prompt you to adjust the Detection Pin's Length.
Once the pin is in the correct position run an Automatic Correction from VPanel.
From VPanel's System Report you will be able to view the Base Tool Length value. This value will change if the pin length changes.