Roland’s heat transfer material, HeatSoft™ ESM-HTM2, is a thin heat-sensitive appliqué material for printing with Eco-Sol MAX inks and cutting with Roland cutting devices. This transfer material is lined with a silicone paper release liner with a controlled peel tension to reduce curl and make weeding easy. The product is applied to a garment by lifting it off of its backing liner with a paper-based or synthetic heat transfer mask and applying to a fabric garment. HeatSoft™ ESM-HTM2 is compatible with cotton, poly-blend 50/50 and 100% polyester fabrics. This product will produce brilliant colorful graphics with a white background on light and dark colored garments. The transferred results provide a final product with a soft hand and excellent wearability. |
 |
Specifications
Total Caliper: |
1.7mil |
Basis Weight: |
58 gsm |
Whiteness: |
Not applicable |
Brightness: |
90 |
Opacity: |
80-90 |
Gloss Level: |
7-12@60° |
Inkset: |
Eco solvent (Eco-Sol MAX) |
Adhesive: |
Thermally activated adhesive to fabric |
Backing: |
Silicone coated paper |
Available Sizes:
50"
24"
20"
Storage and Usage
HeatSoft™ HTM2 - Heat Transfer Material-2 should be handled with care to prevent surface contamination that may affect the printing and cutting of the product. This heat transfer material should be processed and stored in an environment of 60° - 80° F (15° - 21° C) and 30-70% relative humidity (non-condensing) that is clean and relatively dust-free. Store this product in its original packaging in a cool dry area until ready for processing. If storage conditions are outside the recommended operating ranges, allow the material to acclimate to the production environment.
