ESM-SGPA Solvent Glossy Paper with Adhesive
Optimized with a special coating that is ideal for eco-solvent ink printing, this 135 gsm solvent glossy paper has a permanent, water-based acrylic adhesive that is backed with a silicone treated release liner. A productive and cost-effective solution for mounted graphics, it also achieves excellent results for print and cut graphics applications. Solvent Glossy Paper with Adhesive is multicoated to be water and scratch-resistant and has superior white point and gloss level. Compatible with Roland DG SOLJET, VersaArt, VersaCAMM, VersaStudio, TrueVIS and VersaUV printers.
|Basis Weight:||135 g/m2|
|Inkset:||Eco solvent (Eco-Sol MAX, Eco-Sol MAX 2, EJ, TrueVIS), ECO-UV|
|Backing:||Silicone treated paper|
- Posters and Presentations
- POP Displays
- Tradeshow Graphics
- Fine Art/Photographic
Storage and Usage
Storage and Usage
Roland Certified Media should be handled with care before and after printing to prevent surface contamination that may spoil the print. The material should be processed in an environment of 65° to 85° F (18°-30°C) and 50 to 75 percent relative humidity (non-condensing) that is clean and relatively dust-free. Also, some media are affixed strongly to the core, and care should be taken to avoid machine issues due to the non-release of media at the end of the roll. Store this product in its original packaging in a cool and dry area until ready for processing. If storage conditions are outside the recommended operating ranges, allow the paper to acclimate in the specified range for at least 24 to 48 hours before use. Care should be taken to allow the ink on the printed surface to fully cure before finishing, mounting or packaging the finished product for delivery and/or installation.