Technical Support for
Modela Pro MDX-500 3D Milling Machine
Featured Articles
I can't find a Windows 8/8.1 driver!Missing Software
Roland Product End of Life Policy
Search MDX-500 Documents & Knowledge Base Articles
Expand All | Collapse All
Application & Software Guides ( 3 )
This support document offers tips and tricks for cutting a wide variery of shapes with Roland Modeling Machines, MDX
152.20 KB
This tutorial guides you through various steps required to produce a single sided part using the MDX40 and Modela Player 4. Resulting part is a tool sensor holder that can be used to hold the sensor in a safe, accessible location.
1.38 MB
Driver ( 4 )
Windows 10
Windows 2000
Windows Vista
2.5D Driver for Windows Vista (32-bit) ver. 1.40
292.00 KB
Windows XP
2.5D Driver for Windows XP (32-bit only) ver. 1.40
31.81 KB
Owner & User Manual ( 8 )
MDX-500/ 650 Cutting Using Included Software (Spanish)
12.64 MB
User manual part 1. Setup and maintenance guide for MDX-500/650
1.54 MB
User manual part 1. Setup and maintenance guide for MDX-500/650. Francais
6.41 MB
User manual 2. Cutting using the included software. MDX-500/650
1.00 MB
User Manual 3 Cutting using NC Code MDX-500/650
418.76 KB
Users Manual for ZBX-500A and ZBX-650 safety cover. -Cover used with MDX-500 and MDX-650
565.00 KB
Software Updates ( 8 )
This is an updater for 3D Engrave ver. 2.70. A previous version of 3D Engrave is required for this updater to work.
29.25 KB
This is the updater for Dr. Engrave ver. 2.72. A previous version of Dr. Engrave is required for this updater to work.
35.03 KB
This is the updater for the Modela Player 4 ver. 2.12. Modela Player 4 must be installed prior to applying this update.
27.78 KB
The following is the plug-in updater v1.04 for Rhino 4.0 . In order to use this upgrade you must have the software application installed.
4.94 MB
The following is the plug-in updater v1.06 for Rhino 3.0 . In order to use this upgrade you must have the software application installed.
2.38 MB
The following is the software package for Virtual Modela v1.71.
3.87 MB
The following is the updater for Virtual Modela v1.71. In order to use this upgrade you must have the software application installed.
2.08 MB
Utilities ( 1 )
This progrom allows you to send prn, rml, plt or firmware files to your Roland device.
149.25 KB
Knowledge Base Articles ( 9 )
HELP!! I can't find the driver I need for my Roland!
The cut path is being clipped on one side of the print
After operating "Z CENTER MODE", the end mill is placed on ASSY Sensor attemting a cut. But whenever it cuts, the Z axis values per cut are all different.
HELP!! I can't find a Windows 7 driver for my machine!!
HELP!! I can't find a Windows8 driver for my machine!!
HELP!! I lost the software CD for my machine!!
Information about my legacy product
Can I use either of these cleaning cartridges interchangeably?
When outputting a design to your engraver or milling machine, the software needs to be able to translate commands to the device. These commands tell the machine how fast to mill, at what revolutions per minute (RPM), and where to mill in 3D space. This is what makes up a toolpath. A Strategy is a combination of tool movements, material properties, software algorithms, and tool characteristics.