CAMM-1 Pro Series CX-300 30" Vinyl Cutter | Roland DGA
Technical Support for

CAMM-1 Pro Series CX-300 30" Vinyl Cutter


Search CX-300 Knowledge Base

Select a Category:



Driver

Windows 10
Roland does not offer a supporting Windows 10 driver for this Roland DG legacy CAMM-1 Cutter
249.61 KB
CAMM-1 Driver for Windows 8, ver 1.20 (64-bit ONLY) [Model] : GS-24, GX-24, GX-640/500/400/300. CX-300/400/500 Please use "SETUP64.exe" in the extracted folder. Please refer to "readme.txt" for installation.
8.34 MB
Windows 2000
[Model] : GX-24, GX-300, GX-400, GX-500, CX-12, CX-24, CX-300, CX-400, CX-500, CM-12, CM-24, CM-300, CM-400, CM-500 Please refer to "readme.txt" for details
36.50 KB
Windows 7
Roland does not offer a supporting Windows 7 driver for this Roland DG legacy CAMM-1 Cutter
249.64 KB
Windows 8
Roland does not offer a supporting Windows 8 driver for this Roland DG legacy CAMM-1 Cutter
249.63 KB
CAMM-1 Driver for Windows 8, ver 1.20 (64-bit ONLY) [Model] : GS-24, GX-24, GX-640/500/400/300. CX-300/400/500 Please use "SETUP64.exe" in the extracted folder. Please refer to "readme.txt" for installation.
8.34 MB
Windows 95/98
CAMM-1 Cutter Driver for Windows 95 & 98 GX-24/300/400/500, CX-12/24/300/400/500, CM-12/24/300/400/500 & All PNC Cutter models. Please use "SETUP.exe" in the extracted folder. Please refer to "readme.txt"
481.35 KB
Windows Me
CAMM-1 Cutter Driver for Windows ME GX-Series. CX-Series, CM-Series & all PNC Models. Please use "SETUP.exe" in the extracted folder. Please refer to "readme.txt"
481.35 KB
Windows Vista
CAMM-1 Driver for Windows Vista, ver 1.20 (32-bit ONLY) [Model] : GS-24, GX-24, GX-640/500/400/300, CX-300/400/500 Please use "SETUP64.exe" in the extracted folder. Please refer to "readme.txt" for installation.
10.43 MB
[Model] : GX-24, GX-300/400/500, CX-12/24, CX-300/400/500
26.92 KB
Windows XP
CAMM-1 Driver for Windows XP, ver 1.10 (32 Bit) [Model] : GX-24, GX-640/500/400/300. CX12/24/300/400/500 CM-12/24/300/400/500
8.82 MB
[Model] : GX-24, GX-300, GX-400, GX-500, CX-12, CX-24, CX-300, CX-400, CX-500, CM-12, CM-24, CM-300, CM-400, CM-500 Please refer to "readme.txt" for details
36.50 KB
Firmware

firmware updater for CAMM-1 pro, CX-300, CX-400, CX-500 vinyl cutters. version 2.0
336.29 KB
Maintenance/ Calibration Guides

How to change pinch roll wheels and cutter protection strips on the GX-24. Pinch roll wheel replacement also applies to all CAMM-1 and CAMM-1 Pro devices.
55.51 KB
Owner/ User Manual

Users manul details set up and operation instructions for the Cut Choice software. This software supports the following output devices: CAMM-1 PRO CX-300, CX-400 and CX-500. STIKA SX-8, SX-12 and SX-15.
157.31 KB
Users manual for CAMM-1 Pro CX-300, CX-400 and CX-500 vinyl cutters
793.07 KB
Users manual for CAMM-1 Pro CX-300, CX-400, CX-500 vinyl cutters in French
2.57 MB
CX-500 400 300 Manual del Usuario. CX-500 400 300 User's Manual, Espanol.
906.97 KB
Setup/ Install Guides

Installation manual for CutChoice plugin and CorelDraw11
1.90 MB
CX-500/400/300 Unpacking and Repacking instructions
192.52 KB
setup and installation guide for CAMM-1 Pro CX-300, CX-400, CX-500 vinyl cutters
205.44 KB
Training videos

Follow this link to the Roland Academy Webinars On-Demand webpage. Then filter through the videos to find a training session that suits your needs.
31.09 KB