Milling |
| Part No. |
Description |
Price |
| BM-250-2F-250 |
Carb. end mill, 1/4in shank, 2-flute ball |
$49.99
|
| ZC-E436 |
Bottom load, burnishing guide for EGX-400/600 |
$29.99
|
Engraving |
| Part No. |
Description |
Price |
| ADA-BUNDLE-AUTO |
ADA Starter Kit for EGX Pro |
$5,100.00
|
| AS-10 |
Adhesive Sheet Hold-down System (pack of 10) |
$39.99
|
| ASD-ADASIGN-KIT |
ADA/Indoor Signage Kit |
$380.00
|
| BT-171-010 |
Burnish Tool,11/64in shnkx6.5in lgthx.010in tip |
$23.99
|
| BT-171-015 |
Burnish Tool,11/64in shnkx6.5in lgthx.015in tip |
$23.99
|
| BT-171-030 |
Burnish Tool,11/64in shnkx6.5in lgthx.030in tip |
$23.99
|
| C2-171-010K |
Carb. Tip Engr Cutter, .010in 11/64inShnk W/Knob |
$25.99
|
| C2-171-015K |
Carb. Tip Engr Cutter, .015in 11/64inShnk W/Knob |
$25.99
|
| C2-171-030K |
Carb. Tip Engr Cutter, .030in 11/64inShnk W/Knob |
$25.99
|
| C2-171-060K |
Carb. Tip Engr Cutter, .060in 11/64inShnk W/Knob |
$25.99
|
| C2-171-090K |
Carb. Tip Engr Cutter, .090in 11/64inShnk W/Knob |
$25.99
|
| C2-171-125K |
Carb. Tip Engr Cutter, .125in 11/64inShnk W/Knob |
$25.99
|
| C2-171-171K |
Carb. Tip Engr Cutter, .171in 11/64inShnk W/Knob |
$25.99
|
| C2-171-DGK |
Diamond Gravers,non-rotary,11/64in shank, W/knob |
$27.99
|
| C2-171-KNOB |
Threaded Brass Knob for 11/64in shank Engr tools |
$4.29
|
| EGX46XX-KIT |
Engraving Accessories Starter Kit for EGX-400/600 |
$999.99
|
| HS-171-005K |
Hi-Spd Steel Cutter 11/64inshnk 6.5in .005in tip |
$25.99
|
| HS-171-010K |
Hi-Spd Steel Cutter 11/64inshnk 6.5in .010in tip |
$25.99
|
| HS-171-015K |
Hi-Spd Steel Cutter 11/64inshnk 6.5in .015in tip |
$25.99
|
| HS-171-030K |
Hi-Spd Steel Cutter 11/64inshnk 6.5in .030in tip |
$25.99
|
| MV-2 |
Multipurpose Vise for EGX-300/350/360/400/600 |
$719.99
|
| PAR-171-060K |
0.060"Parallel Cutter,11/64"Shank,1/8"Depth |
$30.99
|
| RP-171-BRL010K |
DISCONCarb ADA braille dot cutter,11/64"shk w/knob |
$38.99
|
| RP-171-BRL020K |
Carb. ASA braille dot cutter, 11/64" shank w/knob |
$39.99
|
| RWSTUDIO |
Roland R-Wear Studio Software |
$499.00
|
| US-CHIPSYS-C |
Chip Extraction Sys. UltraQuiet, 1/2hp w/accumltor |
$719.99
|
| US-ENGRVLAB-W |
EngraveLab Expert v8.0 Professional Engraving Software |
$1,199.00
|
| US-FLEXENG-8X |
FlexiEngrave v8.6v2 Professional Engraving Software |
$1,199.00
|
| US-FLTRBAG-A3 |
Filter bag (3-pk) for chip removal system |
$43.99
|
| US-TL171-KIT |
Engraving Tool Starter Kit, 11/64in tools w/holder |
$133.99
|
| ZAD-600 |
Vacuum Adapter for EGX-400/600 |
$209.99
|
| ZC-23-3 |
Collet, 3mm for EGX-300/400/600, JWX-10, MDX-40 |
$39.99
|
| ZC-23-3175 |
Collet, 3.175mm PNC-2300A |
$39.99
|
| ZC-23-635 |
Collet,1/4in(6.35mm)PNC-2300A/MDX-500 |
$35.99
|
| ZS-600 |
Spindle for EGX-400/600 |
$669.99
|
Other |
| Part No. |
Description |
Price |
| XY-IPC-2 |
Cable, 6ft. Parallel (F2A032x06) |
$24.99
|
| XY-RS-23A |
Cable, Serial 6ft Shielded, (DB9F/DB25M) |
$24.99
|
EGX-400 & 600 Engraver
