MDX-40A benchtop milling machine

MDX-40A Milling Machine Specifications

Acceptable materials  Resins such as chemical wood and modeling wax (metal not supported)
X, Y, and Z strokes 12 (X) x 12 (Y) x 4-1/8 (Z) in.
(305 (X) x 305 (Y) x 105 (Z) mm)
Distance from spindle tip to table Maximum 123 mm (4-13/16 in.)
Table size 12 (W) x 12 (D) in.
(305 (W) x 305 (D) mm)
Loadable workpiece weight 8.8 lb (4 kg)
XYZ-axis motor Stepping motor
Feed rate XY-axis: 0.0039 to 1.9 in./s (0.1 to 50 mm/sec.),
Z-axis: 0.0039 to 1.1 in./s (0.1 to 30 mm/sec.)
Software resolution NC-code: 0.000039 in./step (0.001mm/step),
RML-1: 0.00039 in./step (0.01 mm/step)(RML-1)
Mechanical resolution 0.00008 in./step (0.002 mm/step)(Micro-step)
Spindle motor Brushless DC motor, Maximum 100 W
Spindle rotation 4500 to 15000 rpm
Tool chuck Collet
Interface USB (compliant with Universal Serial Bus Specification Revision 1.1)
Power supply Voltage and frequency  AC100 to 240 +/-10%, 50/60 Hz
Required power capacity 2.1 A
Power consumption Approx. 210W
Acoustic noise level No-load operation: 56 dB (A) or less, Standby: 42 dB (A) or less
Dimensions 26-3/8 (W) x 29-15/16 (D) x 21-13/16 (H) in.
669 (W) x 760 (D) x 554 (H) mm
Weight 143.3 lb (65 kg)
Operation temperature 41 to 104°F (5 to 40°C)
Operation humidity  35 to 80% (no condensation)
Included items  Power cord, power plug adapter, USB cable, collet, Z0 sensor, hexagonal wrench, hexagonal screw drivers, spanners, Roland
System Requirements for Inlcuded Software
OS Windows Vista®(32bit edition) or Windows® XP (32bit edition) and Internet Explorer 6.0 or later
CPU Pentium® 4, 2.4GHz or faster recommended
RAM 1GB or more recommended
Free hard-disk space 20MB or more recommended
Video card and monitor A resolution of 1024 x 768 or more recommended, video card compatible with OpenGL recommended, and at least 16-bit
Optional Rotary Axis Unit (ZCL-40A)
Maximum angle of rotation +/-18 x 105° (+/-5000 rotations)
Maximum loadable workpiece size* 4.7 in.(120 mm) diameter by 10.6 in. (270 mm) long
Maximum thickness holdable by workpiece clamp 0.4 to 1.8 in. (10 to 45 mm)
Loadable workpiece weight 2.2 lb (1kg ) (including clamps)
Feed rate 0.23-11.79 rpm
Mechanical resolution 0.005625 deg./step (Micro-step)
Dimensions 18.5 (W) x 11.3 (D) x 4.5 (H) in.
(470 (W) x 286 (D) x 115 (H) mm)
Weight 16.5 lb (7.5 kg)
Included items Y-origin sensors (large and small), Z-origin sensor, Y-origin detection pin, center drill, live center, hexagonal wrench, cap
*The range that can actually be cut is limited by the amount of tool extention and interference between the loaded workpiece
Optional 3D Scanning Sensor Unit (ZSC-1)
Maximum scanning area 12.0 (X) x 12.0 (Y) x 2.3 (Z) in.
(305 (X) x 305 (Y) x 60 (Z) mm)
Distance from probe tip to table Maximum 3.6 in. (92.4 mm)
Table load capacity Maximum 8.8 lb (4 kg)
Sensor Type Roland Active Piezo Sensor (RAPS)
Effective Probe Length 2-5/16 in. (60 mm)
Tip Bulb Radius 0.00315 in. (0.08 mm)
Minimum scan pitch .002 in (.051 mm)
Scanning method Contacting, mesh-point height-sensing
Operating speed XY-axis 0.6 to 1.1 in./s (15 to 30 mm/sec.)
Z-axis 0.04 to 1.1 in./s (1 to 30 mm/sec.)
Item Model Description
Rotary axis unit ZCL-40A See the above specifications
3D Scanning sensor unit ZSC-1 See the above specifications
Replacement spindle unit ZS-40 1GB or more recommended
Dust box ZDX-40 26.33(W) x 30.27(D) x 3.8(H) in.
(666 (W) x 769 (D) x 97 (H) mm)