Technical Support for
Search SG2-300 Documents & Knowledge Base Articles
Expand All | Collapse All
Application Resources ( 2 )
The CoPeck utility version 7.7.0 can be used to pull a report from a Roland printer and then be emailed to a dealership or service center for diagnostic purposes.
7.79 MB
Copeck Utility – Instructions about using the CoPeck tool. Includes the list of Roland Printer models.
385.60 KB
Firmware Updates ( 2 )
SG2-300, SG2-540 & SG2-640 Firmware Version 1.60. The zip file also includes updater application, firmware file and instructions on installation.
5.83 MB
SG2-300, SG2-540 & SG2-640 Firmware Version 1.70. The zip file also includes updater application, firmware file and instructions on installation.
6.60 MB
Maintenance & Calibration Guides ( 1 )
Media Application Guide ( 3 )
HTM3 and PTM2 Application Instructions - Spanish
606.23 KB
HeatSoft SATIN ESM-HTMS and PTM2 Transfer Mask Application Instructions
265.26 KB
Media Specification Sheet ( 4 )
Especificaciones del Material de Termotransferencia de Poliuretano HeatSoft SATIN ESM-HTMS
401.51 KB
Specification Sheet for PGM-PTM2 HeatSoft Polyester Transfer Mask - Spanish
147.59 KB
MSDS ( 7 )
Safety Data Sheet for ESM-HTMS: HeatSoft SATIN heat transfer material
140.72 KB
Material Safety Data Sheet for PGM-PTM2 HeatSoft Polyester Transfer Mask
140.07 KB
Owner & User Manual ( 3 )
TUC-4 Automatic Media Take-up Users Manual. This TUC-4 Users Manual contains the full installation and operation instructions.
4.91 MB
Users manual for the SG2 series models. SG2-300, SG2-540 SG2-640
4.17 MB
Setup & Install Guides ( 2 )
Set up and installation guide for the SG2-300, SG2-540 SG2-640 printer cutter.
7.59 MB
Software Updates ( 2 )
This document includes links to VersaWorks Support Pages, the VersaWorks 6 Upgrade page. Also, included are links to troubleshooting documents, software system requirements and the compatibility list.
137.32 KB
Use this updater if you are running VersaWorks version 6.0 or later . After applying this update, you can update to the latest version either Online or by applying the latest offline updater.
46.99 KB
Training Videos ( 1 )
In these step-by-step help videos, we'll show you some of the most important features, panels, tools, settings, and preferences in the latest VersaWorks 6 RIP software from Roland DGA.
24 videos in this series.
45.22 KB
Troubleshooting Guides ( 12 )
This troubleshooting document will cover the aspects of a crop mark not found.
1.73 MB
The troubleshooting guide will review all aspects of this symptom.
3.71 MB
This document will go over all aspects when encountering a corrupt file.
1.95 MB
This troubleshooting document will describe the possible causes for horizontal banding
3.65 MB
How to VerifyReset the TCPIP Connection. For all nework based printers.
2.02 MB
This troubleshooting document will help guide you through the symptom of missing a cut line in VersaWorks.
2.98 MB
This troubleshooting guide will help when you encounter print cut alignment issues when using the crop mark function.
3.64 MB
This troubleshooting guide will review different aspects of color variations.
2.58 MB
The troubleshooting guide will describe the reasons for having a sheet set up error on a Roland printer.
1.53 MB
This troubleshooting guide will help when you encounter print cut alignment issues. Not using the cropmark feature.
3.40 MB
This document offers suggestions on how to troubleshoot Service Call Error 0400
1.32 MB
Knowledge Base Articles ( 4 )
Chart of color products (EcoSol/UV/Sublimation) that includes the various configurations, ink types and part numbers for ink. This article has been optimized for Mobile viewing.
This document provides the correct TU, HU and BU models for the various printer models where applicable.
FAQ for VersaWorks 6 - Includes supported devices, computer requirements and downloading/installing information.