Technical Support for
CAMM-3 PNC-3000 3D Milling Machine
Featured Articles
I can't find a Windows 8/8.1 driver!Roland Product End of Life Policy
Search PNC-3000 Documents & Knowledge Base Articles
Expand All | Collapse All
Driver ( 2 )
Windows 10
Windows 2000, Windows XP
Driver for WindowsXP2000 Ver.3.62. Please refer to the readme.txt file for installation instructions.
695.32 KB
Software Updates ( 3 )
This is an updater for 3D Engrave ver. 2.70. A previous version of 3D Engrave is required for this updater to work.
47.79 KB
This is the updater for Dr. Engrave ver. 2.72. A previous version of Dr. Engrave is required for this updater to work.
54.22 KB
Utilities ( 1 )
This progrom allows you to send prn, rml, plt or firmware files to your Roland device.
149.25 KB
Knowledge Base Articles ( 7 )
HELP!! I can't find the driver I need for my Roland!
The cut path is being clipped on one side of the print
HELP!! I can't find a Windows 7 driver for my machine!!
HELP!! I can't find a Windows8 driver for my machine!!
Information about my legacy product
Can I use either of these cleaning cartridges interchangeably?
When outputting a design to your engraver or milling machine, the software needs to be able to translate commands to the device. These commands tell the machine how fast to mill, at what revolutions per minute (RPM), and where to mill in 3D space. This is what makes up a toolpath. A Strategy is a combination of tool movements, material properties, software algorithms, and tool characteristics.