EGX-30 Desktop Rotary Engraver | Roland DGA
Technical Support for

EGX-30 Desktop Rotary Engraver


Featured Articles
How to install a Roland driver in Windows 7 and Windows Vista
Missing Software
Roland Product End of Life Policy


Search EGX-30 Documents & Knowledge Base Articles



Expand All | Collapse All
The following document details how to colorfill engraved output
22.99 KB
The following document outlines different cutter types used for engraving.
85.22 KB
The following details tooling used for dovetail engraving
23.04 KB
The following outlines engraving terminology
22.40 KB
Antares Fact Sheet, Rotary Engraving.
22.72 KB
The following outlines how to create multiple plates using Dr. Engrave software
65.24 KB
The following document offers detailed instructions on creating a Braille drill job in EngraveLab
129.86 KB
The following document provides info to new users about engraving for profit.
2.45 MB
The following service bulletin outlines how to set-up, configure and output an engraving file for Rhinestone Motif applications. This is not all inclusive and meant as a guide only.
0.98 MB
This document details which USB to Serial adapters will work with Roland units serial ports.
106.95 KB
Art Center - Roland Education in 3D Video
0.00 bytes
Windows 10
OS Compatibility List
48.77 KB
Windows 10, Windows 8
2.5D Driver for Windows 8 Windows 10 32-bit only
50.04 KB
2.5D Driver for Windows 8 Windows 10 64-bit ver 1.20
43.77 KB
Windows 2000
2.5D Driver for Windows 2000 ver. 1.16
67.50 KB
Windows 7
2.5D Driver for Windows 732-bit only
51.78 KB
2.5D Driver for Windows 7 64-bit ver 1.20
43.68 KB
Windows Vista
2.5D Driver for Windows Vista 32-bit ver. 1.40
311.00 KB
2.5D Driver for Windows Vista 64-bit ver 1.20
43.19 KB
Windows XP
2.5D Driver for Windows XP 32-bit only ver. 1.40
45.65 KB
Users guide for Rolands 3D Engrave software
908.79 KB
Users manual for Rolands Dr Engrave software
601.54 KB
Users manual for Rolands EGX 30 Engraver.
480.03 KB
users manual for Rolands EGX 30 Engraver, francais
1.58 MB
users manual for Roland EGX 30 Engraver, espanol
5.35 MB
Users manual for EngraveLab software
18.11 MB
This document discusses Roland DGAs Depot Repair Policies
183.62 KB
This installation and setup guide PDF details how to install R-Wear Studio software.
45.87 KB
Quick start set-up guide for Rolands EGX-30 and EGX-30A, for plastic engraving and scribing applications.
287.44 KB
This document outlines how to install US-CHIPSYS-C vacuum system in a Roland Engraver
48.46 KB
The following is the software package for 3D Engrave v2.60.
4.16 MB
This is an updater for 3D Engrave ver. 2.70. A previous version of 3D Engrave is required for this updater to work.
41.57 KB
The following is the software package for Dr. Engrave v2.68.
2.79 MB
This is the updater for Dr. Engrave ver. 2.72. A previous version of Dr. Engrave is required for this updater to work.
48.01 KB
The following is the plug-in updater v1.04 for Rhino 4.0 . In order to use this upgrade you must have the software application installed.
4.94 MB
The following is the plug-in updater v1.06 for Rhino 3.0 . In order to use this upgrade you must have the software application installed.
2.38 MB
The ZIP file contains the Roland library of Single Line Font to be used with Dr. Engrave. Installation instructions are included in this download package.
214.01 KB
This is an updater for R-WearStudio ver. 1.32. A previous version of R-WearStudio must be installed for this work.
42.15 KB
The following is the software package for Virtual Modela v1.71.
3.87 MB
The following is the updater for Virtual Modela v1.71. In order to use this upgrade you must have the software application installed.
2.08 MB
Cutting 3D Objects Created in Rolands 3D Engrave Software
43.17 KB
The following is a basic set-up and operation video for diamond scribing using Rolands EGX-30 Engraver.
9.83 MB
The following is a basic set-up and operation video for plastic engraving using Rolands EGX-30 Engraver.
11.87 MB
Follow this link to the Roland Academy Webinars On-Demand webpage. Then filter through the videos to find a training session that suits your needs.
51.14 KB
Setup and Basic Use of Rolands 3D Engrave Software
43.23 KB
Using Rolands 3D Engrave Software
43.09 KB
The following video outlines how to vectorize a graphic using Roland Dr. Engrave.
52.08 KB
Limit Switch Reset Procedure
67.45 KB
Are there any vise or vacuum table options for the EGX30A?
HELP!! I can't find the driver I need for my Roland!
The cut path is being clipped on one side of the print
EGX Series:Daily Care And Maintenance
EGX-300 is receiving a I/O error using a serial cable
What are the differences between the EGX30 and EGX30A?
How to install a Roland driver in Windows 7 and Windows Vista
HELP!! I lost the software CD for my machine!!
Information about my legacy product
Can I use either of these cleaning cartridges interchangeably?
What applications can I use my EGX30A for?
All Roland devices with a USB, Parallel (LPT), or Serial (COM) port need a driver to communicate with a computer. For Roland products compatible with Apple Macintosh operating systems, a plugin is used with Adobe Illustrator. For Roland devices with an Ethernet port, the output software (e.g. - RIP)includes the driver as part of the application.
When outputting a design to your engraver or milling machine, the software needs to be able to translate commands to the device. These commands tell the machine how fast to mill, at what revolutions per minute (RPM), and where to mill in 3D space. This is what makes up a toolpath. A Strategy is a combination of tool movements, material properties, software algorithms, and tool characteristics.
Why can't I connect my Roland unit to my new computer? I have a parallel to USB adapter
Windows 7 Software Compatibility List
XY Speed Not Changing on Engraver When Adjusted in Tool Properties.