Digital Denture Milling | Roland DGA

Time Reduction Kits (TRK) for Denture Bases and Models

Kits for Digital Denture Milling of Partial-Dentures, Full-Dentures, and Model Creation

  • Removable Denture Kit

    CA -DK1

    $1,249.95 US*

    Model Kit

    CA -MK1

    $1,249.95 US*

    * U.S. only. For Canada, Latin America and Caribbean pricing, please call (949) 727-2100, or contact an Authorized Roland Dealer in your area.

With Time Reduction Kits (TRK) from DGSHAPE, produce molded gypsum or acrylic based materials for accurately milling partial or full-denture bases, as well as models, using your DWX-52D, 52DC, and 52DCi dental mill.

  • Removable Denture Kit reduces in-house finishing time for full dentures and partial denture applications
  • Affordable materials combine with precision denture milling for a more cost-effective and accurate solution
  • The TRK digital workflow saves time and cost when compared to traditional and 3D printing methods

Request a Dealer

Two-Easy-Kits and Three-Easy-Steps

Removable Denture Kit
CA-DK1

Using a kit that includes specially-designed silicone molds, polymerize an acrylic and monomer mixture to create acrylic material discs for milling with DWX devices.

Milled Base Model

Three-Easy-Steps

Removable Denture Kit

1

Mix & Pour

Measure self-curing or cold-curing liquid or powder in a measuring cup, vibrate the mixture while pouring, then add into the denture base mold.

Denture Base Kit Milling

2

Polymerize

Place mold in a pressure pot to polymerize then remove the cured material disc from the mold.

Denture Base Kit Milling

3

Mill

Set the material disc in the TRK fixture and place the fixture in a milling adapter to mill a partial or full denture base on a DWX device.

Model Kit
CA-MK1

Using a kit that includes specially-designed silicone molds— pour, cure and harden gypsum material to create material discs for milling with DWX devices.

Milled Cast Model

Three-Easy-Steps

Denture Base Kit Milling

1

Mix & Pour

Measure gypsum and water in a container, mix and pour into a full-arch or quadrant silicone mold.

Denture Base Kit Milling

2

Cool

Wait for the mixture to harden and then remove the hardened gypsum material disc from the silicone mold.

Denture Base Kit Milling

3

Mill

Set the material disc in the TRK fixture and place the fixture in a milling adapter to mill a model on a DWX device.

Kit Includes

Silicone mold for denture

Full-Arch Silicone Mold

6 Molds

With your choice of cold-curing liquid or powder, create resin blocks for milling.

Fixture

Denture Base Tips

50 sets

Combine with the silicone mold, prior to pouring for disc adapter integration.

Denture Base Fixtures

TRK Fixtures

3 Fixtures

Special fixtures allow acrylic disc insertion into your disk adapters.

Silicone Plates

Silicone Plates

3 Plates

For placing on top of the mold during polymerization.

Pre-roughing tool

2.0mm Flat End Carbide Tool

1 Tool (ZRB-100D)

A specially designed burr to significantly reduce roughing time with DWX technologies.

Silicone Plates

Leveling Spatula

1 Spatula

Create a level surface on your mold before polymerization.

Kit Includes

Silicone mold for denture

Full-Arch Silicone Mold

3 Full-Arch Molds

With your choice of gypsum materials, create full-arch gypsum discs for milling.

Fixture

Quadrant Silicone Mold

3 Quadrant Molds

With your choice of gypsum materials, create partial gypsum discs for milling.

Denture Base Fixtures

TRK Fixtures

3 Fixtures

Special fixtures allow gypsum disc insertion into your disk adapters

Silicone Plates

Leveling Spatula

1 Spatula

Create a level surface on your mold after pouring the plaster.

Pre-roughing tool

2.0mm Flat End Carbide Tool

1 Tool (ZRB-100D)

A specially designed burr to significantly reduce roughing time with DWX technologies.

An Innovation in Digital Denture Milling and Model Creation

Speed-up your workflow with simplified, cost-effective kits that produce material discs for milling strong and accurate denture models, full dentures and partial dentures. Whether you’ve been waiting for the right digital denture solution or you want to maximize the profit capabilities of your DWX mills, TRK kits offer exceptional cost and workflow benefits.

Cost-Effective and Versatile Materials

At a fraction of the material cost of 3D printing or milling standard discs, produce affordable acrylic or gypsum discs— these can be custom shaded to match a patient’s natural tones.

Save With Cutting Edge Design

A specially designed DGSHAPE tool mills with efficiency, precision and ease, while pre-shaped molds ensure minimal material waste.

Easy Post-Production Adjustment (CA-DK1)

Acrylic materials offer quicker reline and rebase processes for meeting patient needs in less time.

Longer Lasting and Increased Strength (CA-DK1)

Other digital denture base production methods offer short-term results while the Removable Denture Kit solution combines acrylic and monomer materials to produce strong, long-term products.

Additional Information

CA-DK1

CA-DK1
Compatible Models DWX-52DCi, DWX-52DC, DWX-52D
Compatible CAD
  • Full Denture Design Module / 3Shape
  • Full Denture Module / exocad
  • DWOS Full Denture / dental wings
Compatible CAM
  • MillBox / CIMsystem
  • hyperDENT / FOLLOW-ME! Technology Group

 

CA-MK1
CA-MK1
Compatible Models DWX-52DCi, DWX-52DC, DWX-52D
Compatible CAD
  • Dental System 2018 ver.1 or later / 3Shape
  • Model Createor / exocad
  • DWOS Model Builder / dental wings
Compatible CAM
  • MillBox / CIMsystem
  • hyperDENT / FOLLOW-ME! Technology Group

Use the form below to contact a sales representative.