Kits for Digital Denture Milling of Partial-Dentures, Full-Dentures, and Model Creation
-
Removable Denture Kit
CA -DK1
$1,249.95 US*
Model Kit
CA -MK1
$1,249.95 US*
* U.S. only. For Canada, Latin America and Caribbean pricing, please call (949) 727-2100, or contact an Authorized Roland DGA Dealer in your area.
With Time Reduction Kits (TRK) from DGSHAPE, produce molded gypsum or acrylic based materials for accurately milling partial or full-denture bases, as well as models, using your DWX-52D, 52DC, and 52DCi dental mill.
- Removable Denture Kit reduces in-house finishing time for full dentures and partial denture applications
- Affordable materials combine with precision denture milling for a more cost-effective and accurate solution
- The TRK digital workflow saves time and cost when compared to traditional and 3D printing methods
Two-Easy-Kits and Three-Easy-Steps
Removable Denture Kit
CA-DK1
Using a kit that includes specially-designed silicone molds, polymerize an acrylic and monomer mixture to create acrylic material discs for milling with DWX devices.
Three-Easy-Steps
Mix & Pour
Measure self-curing or cold-curing liquid or powder in a measuring cup, vibrate the mixture while pouring, then add into the denture base mold.
Polymerize
Place mold in a pressure pot to polymerize then remove the cured material disc from the mold.
Mill
Set the material disc in the TRK fixture and place the fixture in a milling adapter to mill a partial or full denture base on a DWX device.
Kit Includes
Full-Arch Silicone Mold
6 Molds
With your choice of cold-curing liquid or powder, create resin blocks for milling.
Denture Base Tips
50 sets
Combine with the silicone mold, prior to pouring for disc adapter integration.
TRK Fixtures
3 Fixtures
Special fixtures allow acrylic disc insertion into your disk adapters.
Silicone Plates
3 Plates
For placing on top of the mold during polymerization.
2.0mm Flat End Carbide Tool
1 Tool (ZRB-100D)
A specially designed burr to significantly reduce roughing time with DWX technologies.
Model Kit
CA-MK1
Using a kit that includes specially-designed silicone molds— pour, cure and harden gypsum material to create material discs for milling with DWX devices.
Three-Easy-Steps
Mix & Pour
Measure gypsum and water in a container, mix and pour into a full-arch or quadrant silicone mold.
Cool
Wait for the mixture to harden and then remove the hardened gypsum material disc from the silicone mold.
Mill
Set the material disc in the TRK fixture and place the fixture in a milling adapter to mill a model on a DWX device.
Kit Includes
Full-Arch Silicone Mold
3 Full-Arch Molds
With your choice of gypsum materials, create full-arch gypsum discs for milling.
Quadrant Silicone Mold
3 Quadrant Molds
With your choice of gypsum materials, create partial gypsum discs for milling.
TRK Fixtures
3 Fixtures
Special fixtures allow gypsum disc insertion into your disk adapters
Leveling Spatula
1 Spatula
Create a level surface on your mold after pouring the plaster.
2.0mm Flat End Carbide Tool
1 Tool (ZRB-100D)
A specially designed burr to significantly reduce roughing time with DWX technologies.
An Innovation in Digital Denture Milling and Model Creation
Speed-up your workflow with simplified, cost-effective kits that produce material discs for milling strong and accurate denture models, full dentures and partial dentures. Whether you’ve been waiting for the right digital denture solution or you want to maximize the profit capabilities of your DWX mills, TRK kits offer exceptional cost and workflow benefits.
Cost-Effective and Versatile Materials
At a fraction of the material cost of 3D printing or milling standard discs, produce affordable acrylic or gypsum discs— these can be custom shaded to match a patient’s natural tones.
Save With Cutting Edge Design
A specially designed DGSHAPE tool mills with efficiency, precision and ease, while pre-shaped molds ensure minimal material waste.
Easy Post-Production Adjustment (CA-DK1)
Acrylic materials offer quicker reline and rebase processes for meeting patient needs in less time.
Longer Lasting and Increased Strength (CA-DK1)
Other digital denture base production methods offer short-term results while the Removable Denture Kit solution combines acrylic and monomer materials to produce strong, long-term products.
Additional Information
CA-DK1
| CA-DK1 | |
|---|---|
| Compatible Models | DWX-52DCi, DWX-52DC, DWX-52D |
| Compatible CAD |
|
| Compatible CAM |
|
CA-MK1
| CA-MK1 | |
|---|---|
| Compatible Models | DWX-52DCi, DWX-52DC, DWX-52D |
| Compatible CAD |
|
| Compatible CAM |
|
Use the form below to contact a sales representative.
Roland DG has been a leader in advanced machine manufacturing for over 35 years, providing practical and reliable solutions as well as unmatched service and support for dental professionals.
DGSHAPE is improving dental restoration workflows and making it incredibly easy for labs to produce accurate and cost-efficient dental prosthetics.
