DWX-42W Wet Dental Mill | Roland DGA
Expandir Todo | Desplegar Todo
Using the Abutment Kit AK-1
968.82 KB
6-Pin (Multi-Pin) Adapter - 42W - Usage instructions
1.87 MB
Windows 10
Dental Driver for DWX-52D, DWX-52DCi DWX-42W. Version 1.40. Contains drivers for both 32 Bit and 64 Bit. Supports Windows 7, 8.1 10. WINX64 is 64 bit folder. WINX86 is 32 Bit folder.
15.58 MB
We do recommend you to read through this document first for your better understanding of DGSHAPE Dental Driver. < Table of Contents > 1. Overview 2. Installing the Driver 3. Uninstalling the Driver 4. Important Notes
60.81 KB
Support for Windows7 by Microsoft ended on Jan. 14, 2020.
71.00 bytes
Windows 10, Windows 8, Windows 7
Dental Driver for DWX-52D, DWX-52DCi DWX-42W. Version 1.32. Contains drivers for both 32 Bit and 64 Bit. Supports Windows 7, 8.1 10. WINX64 is 64 bit folder. WINX86 is 32 Bit folder.
12.53 MB
Windows 7
Dental Driver for DWX-52D, DWX-52DCi DWX-42W. Version 1.40. Contains drivers for both 32 Bit and 64 Bit. Supports Windows 7, 8.1 10. WINX64 is 64 bit folder. WINX86 is 32 Bit folder.
15.58 MB
We do recommend you to read through this document first for your better understanding of DGSHAPE Dental Driver. < Table of Contents > 1. Overview 2. Installing the Driver 3. Uninstalling the Driver 4. Important Notes
60.81 KB
Windows 8
Dental Driver for DWX-52D, DWX-52DCi DWX-42W. Version 1.40. Contains drivers for both 32 Bit and 64 Bit. Supports Windows 7, 8.1 10. WINX64 is 64 bit folder. WINX86 is 32 Bit folder.
15.58 MB
We do recommend you to read through this document first for your better understanding of DGSHAPE Dental Driver. < Table of Contents > 1. Overview 2. Installing the Driver 3. Uninstalling the Driver 4. Important Notes
60.81 KB
Firmware 3.00 updates the main board for the DWX-42W wet mill.
2.20 MB
Firmware 3.10 updates the main board for the DWX-42W wet mill.
2.20 MB
DWX-42W BeforeAfter Daily Operations
431.78 KB
This supplementary document will guide you through proper tool setup, maintenance schedules, and coolant management for the DWX-42W wet mill.
269.23 KB
Guide to maintaining DWX-4W nozzle integrity.
76.91 KB
Safety Data Sheet for DGShape ZCH-XXXD dated 53019
138.29 KB
DWX-42W Mode d’emploi
4.93 MB
This User Manual will walk users through the proper VPanel setup steps, operations, and maintenance procedures for the DWX-42W wet mill.
7.61 MB
DWX-42W Accessories
310.74 KB
This documents reviews the current Roland DGA depot repair policy
147.37 KB
Air Compressor Guide For the DWX-4W
368.15 KB
DWX-42W Packing Diagram
30.22 KB
This setup guide will walk users through the steps for proper installation of the DWX-42W wet mill.
6.99 MB
Most Roland devices are supplied with a one year standard manufacturers warranty, but by registering your device within 60 days of purchase, your product could qualify for an extended warranty of up to 3 years
79.00 bytes
AK-1 Titanium Abutment Kit for the DWX-42W MillBox CAM software updates. Please use the update to the latest version the CAM to use the Kit.
74.00 bytes
CIMSystem MillBox Wet Mills Software Updates 2021 - MillBox for DGSHAPE Wet Mills v5.0.2
27.98 KB
This is an installer program for VPanel for DWX-52D, DWX-52DC, DWX-52DCi, DWX-42W. Double-click setup.exe and follow the instructions as displayed for installation. Win10 / 8.1. Software supports 32-bit version of Windows. In 64-bit version of Windows
191.35 MB
This is an installer program for VPanel for DWX-52D, DWX-52DC, DWX-52DCi, DWX-42W. Double-click setup.exe and follow the instructions as displayed for installation. Win10 / 8.1. Software supports 32-bit version of Windows. In 64-bit version of Windows
191.53 MB
Get up and running with the DWX-42W wet mill as Roland DGA Dental Product Manager Dwight Blair walks you through the first installation step. In this video, youll learn how to safely unbox your device and all of the accessories for your new wet mill.
48.15 KB
In this video, you will learn how to remove all retainers inside the mill and attach the air regulator.
45.59 KB
In this video, you will learn how to install the dental driver, VPanel software, and user manual onto your PC.
48.01 KB
In this video, you will learn how to combine coolant additive, chelate agent, and distilled water to fill the coolant tank for your device.
48.05 KB
In this video, you will learn how to place the correction jigs and detection pin into the milling device to perform an automatic calibration.
48.22 KB
In this video, you will learn how to start the spindle run-in procedure and the difference between a spindle run-in short and a spindle run-in long.
48.24 KB
In this video, you will learn how to clean and apply grease to the collet and spindle for your device, an important daily operation to keep your mill running efficiently.
48.31 KB
YouTube portal for Global DGSHAPE Video Content
48.89 KB
Dental Driver, VPanel for DWx and DWX-42W Manuals
114.92 MB
"****-****" An unknown error occurred.
"1000-****" The % limit switch was not found. The name of the axis (X, Y, Z, A, or a combination of these axes) is displayed for %.
"1006-02**" The % axis position has been shifted. The name of the axis (X, Y, Z, A, or a combination of these axes) is displayed for %.
"101C-0000" The milling bur sensor was not found.
"101D-000*" The % milling bur cannot be released. The milling bur stocker number (1 to 7) is displayed for %.
"101D-010*" The % milling bur cannot be released. It might be broken from the root. The milling bur stocker number (1 to 7) is displayed for %.
"101E-000*" The % milling bur might be broken. The milling bur stocker number (1 to 7) is displayed for %.
"101F-000*" The % milling bur chucking has slipped out. The milling bur stocker number (1 to 7) is displayed for %
"1020/1021-000*" The % milling bur is too long/too short. The milling bur stocker number (1 to 7) is displayed for %�
"1022-000*" The % milling bur was not found. The milling bur stocker number (1 to 7) is displayed for %�
"1023-0000 to 1028-0000" Milling data error. • 1023-0000: Milling data error. The number of parameters is incorrect. • 1024-0000: Milling data error. The parameter is out of range. • 1025-0000: Milling data error. A wrong command is detected. • 1026-0000: Milling data error. The address is not defined. • 1027-0000: Milling data error. The parameter is not defined. • 1028-0000: Milling data error. The operation cannot be executed
"1029-0000" The spindle experienced an overload.
"102A-000*" The spindle experienced overcurrent.
"102B-0000" The spindle motor temperature is too high.
"102E-0000" The mechanical part has collided.
"1033-000*" The coolant has run out.
"1034-0000" The coolant tank is not installed.
"1038-0000" Milling data error. No milling bur is selected.
"103A-000*" DANGER!! The coolant is leaking!!
"103B-0000" The automatic correction is not yet finished.
"103D-0000" Milling data error. The milling bur cannot reach the milling position.
"105E-0000" The pressure of the compressed air is too high or low.
HELP!! I can't find the driver I need for my Roland!
Change of taper cleaner
The cut path is being clipped on one side of the print
With Roland limited warranties, you get not only extensive coverage of your device, but the best service and support in the industry. All products come standard with the manufacturers warranty outlined below, with upgrade options available on many products.
DGSHAPE Corporation Software License Agreement
DWX-42W - Periodic Care and Maintenance - Cleaning the Coolant Nozzle
DWX-42W - Replacing Consumable Parts - Replacing the Collet
DWX-42W COLLET SPANNER Inspection
Old coolant can influence proper water flow in the system and the quality of the milling process
DWX-42W- Periodic Care and Maintenance Replacing the Coolant
Link to sales guide for the DWX-42W Dental Mill. Includes new features.
Extended Periods of Non-Use / Moving the Machine
HELP!! I can't find a Windows 7 driver for my machine!!
HELP!! I can't find a Windows8 driver for my machine!!
Message [ERROR OCCUR] 1024-0000 Milling data error
MillBox - Security Software / Anti-Virus Exclusions
HELP!! Ilost the software CDfor my machine!!
Tech Support Terms and Conditions
Information about my legacy product
Can I use either of these cleaning cartridges interchangeably?
Tech Support Terms and Conditions
Different ways to arrange the VPanel layout and resetting the application back to default
Keeping VPanel up to the latest version is very important and we just made it easier. Take a look at the following video and find out more.
When outputting a design to your engraver or milling machine, the software needs to be able to translate commands to the device. These commands tell the machine how fast to mill, at what revolutions per minute (RPM), and where to mill in 3D space. This is what makes up a toolpath. A Strategy is a combination of tool movements, material properties, software algorithms, and tool characteristics.