Article | Roland
  1. Inicio
  2. Servicio y Soporte Roland DGA Care
  3. Sistemas CAD/CAM Dentales
  4. DWX-42W Wet Dental Mill
  5. Article
Página de Inicio de Soporte      Registro de Garantía      Enviar E-mail a Soporte      Foros de Usuario
Base de conocimientos Article

DWX-42W Wet Dental Mill (Wood Crate)

Cargo
"1033-000*" The coolant has run out
Síntoma
"1033-000*" The coolant has run out.
Solución
Situation/Error Cause
  • The coolant tank is not filled with the appropriate amount of coolant.
  • The coolant filters or coolant lines are clogged.
Procedure
  1. Fill the coolant tank with the appropriate amount of coolant. "P. 65 "3. Pour in the new coolant."
  2. According to the situation, perform the operations shown below.
    • When the error occurred during milling
      • Press the operation button on the built-in panel. Milling will resume.
    • When the error occurred outside of milling
      • Hold down the operation button on the built-in panel. This will clear the error.

If the Error Occurs Again
Perform the operations shown below
Modificado
April 30, 2020
ARRIBA