DWX-42W Wet Dental Mill | Roland DGA
Expand All | Collapse All
Windows 10
Dental Driver for DWX-52D, DWX-52DCi & DWX-42W. Version 1.32. Contains drivers for both 32 Bit and 64 Bit. Supports Windows 7, 8.1 & 10. WINX64 is 64 bit folder. WINX86 is 32 Bit folder.
12.53 MB
Windows 7
Dental Driver for DWX-52D, DWX-52DCi & DWX-42W. Version 1.32. Contains drivers for both 32 Bit and 64 Bit. Supports Windows 7, 8.1 & 10. WINX64 is 64 bit folder. WINX86 is 32 Bit folder.
12.53 MB
Windows 8
Dental Driver for DWX-52D, DWX-52DCi & DWX-42W. Version 1.32. Contains drivers for both 32 Bit and 64 Bit. Supports Windows 7, 8.1 & 10. WINX64 is 64 bit folder. WINX86 is 32 Bit folder.
12.53 MB
Firmware 1.30 updates the main board for the DWX-42W wet mill.
2.20 MB
Firmware 1.40 updates the main board for the DWX-42W wet mill.
2.20 MB
Firmware 2.00 updates the main board for the DWX-42W wet mill.
2.20 MB
DWX-42W Before/After Daily Operations
431.78 KB
This supplementary document will guide you through proper tool setup, maintenance schedules, and coolant management for the DWX-42W wet mill.
269.23 KB
Guide to maintaining DWX-4W nozzle integrity.
76.91 KB
Safety Data Sheet for DGShape ZCH-XXXD dated 5/30/19
138.29 KB
This User Manual will walk users through the proper VPanel setup steps, operations, and maintenance procedures for the DWX-42W wet mill.
7.61 MB
DWX-42W Accessories
310.86 KB
Air Compressor Guide For the DWX-4W
368.15 KB
This setup guide will walk users through the steps for proper installation of the DWX-42W wet mill.
6.99 MB
CliniCAD is design software for the dental clinic. This software allows the development of crown, inlay, onlay, and veneer restorations.
622.73 MB
MillBox CAM software updates.
27.85 KB
MillBox DGSHAPE Wet 2.6.3 is the latest installer for the DWX-42W and DWX-4W dental mills.
842.14 MB
MillBox DGSHAPE Wet 2.6.3 is the latest updater for the DWX-42W and DWX-4W dental mills.
618.59 MB
This is an installer program for VPanel for DWX-52D, DWX-52DC, DWX-52DCi, DWX-42W. Download the exe file, and double-click "setup.exe" and follow the instructions as displayed for installation.
146.05 MB
This is an installer program for VPanel for DWX-52D, DWX-52DC, DWX-52DCi, DWX-42W. Download the exe file, and double-click "setup.exe" and follow the instructions as displayed for installation.
149.69 MB
Get up and running with the DWX-42W wet mill as Roland DGA Dental Product Manager Dwight Blair walks you through the first installation step. In this video, you'll learn how to safely unbox your device and all of the accessories for your new wet mill.
27.80 KB
In this video, you will learn how to remove all retainers inside the mill and attach the air regulator.
26.28 KB
In this video, you will learn how to install the dental driver, VPanel software, and user manual onto your PC.
27.74 KB
In this video, you will learn how to combine coolant additive, chelate agent, and distilled water to fill the coolant tank for your device.
27.78 KB
In this video, you will learn how to place the correction jigs and detection pin into the milling device to perform an automatic calibration.
27.94 KB
In this video, you will learn how to start the spindle run-in procedure and the difference between a spindle run-in short and a spindle run-in long.
27.96 KB
In this video, you will learn how to clean and apply grease to the collet and spindle for your device, an important daily operation to keep your mill running efficiently.
28.01 KB
YouTube portal for Global DGSHAPE Video Content
28.10 KB
DGSHAPE Software Package RSP-101a version 1.3 for Windows
114.92 MB
"****-****" An unknown error occurred.
"1000-****" The % limit switch was not found. The name of the axis (X, Y, Z, A, or a combination of these axes) is displayed for %.
"1006-02**" The % axis position has been shifted. The name of the axis (X, Y, Z, A, or a combination of these axes) is displayed for %.
"101C-0000" The milling bur sensor was not found.
"101D-000*" The % milling bur cannot be released. The milling bur stocker number (1 to 7) is displayed for %.
"101D-010*" The % milling bur cannot be released. It might be broken from the root. The milling bur stocker number (1 to 7) is displayed for %.
"101E-000*" The % milling bur might be broken. The milling bur stocker number (1 to 7) is displayed for %.
"101F-000*" The % milling bur chucking has slipped out. The milling bur stocker number (1 to 7) is displayed for %
"1020/1021-000*" The % milling bur is too long/too short. The milling bur stocker number (1 to 7) is displayed for %�
"1022-000*" The % milling bur was not found. The milling bur stocker number (1 to 7) is displayed for %�
"1023-0000 to 1028-0000" Milling data error. • 1023-0000: Milling data error. The number of parameters is incorrect. • 1024-0000: Milling data error. The parameter is out of range. • 1025-0000: Milling data error. A wrong command is detected. • 1026-0000: Milling data error. The address is not defined. • 1027-0000: Milling data error. The parameter is not defined. • 1028-0000: Milling data error. The operation cannot be executed
"1029-0000" The spindle experienced an overload.
"102A-000*" The spindle experienced overcurrent.
"102E-0000" The mechanical part has collided.
"1033-000*" The coolant has run out.
"1034-0000" The coolant tank is not installed.
"1038-0000" Milling data error. No milling bur is selected.
"103B-0000" The automatic correction is not yet finished.
"103D-0000" Milling data error. The milling bur cannot reach the milling position.
"105E-0000" The pressure of the compressed air is too high or low.
HELP!! I can't find the driver I need for my Roland!
The cut path is being clipped on one side of the print
DWX-42W - Periodic Care and Maintenance - Cleaning the Coolant Nozzle
DWX-42W - Replacing Consumable Parts - Replacing the Collet
DWX-42W- Periodic Care and Maintenance Replacing the Coolant
Link to sales guide for the DWX-42W Dental Mill. Includes new features.
Extended Periods of Non-Use / Moving the Machine
HELP!! I lost the software CD for my machine!!
Information about my legacy product
Can I use either of these cleaning cartridges interchangeably?
When outputting a design to your engraver or milling machine, the software needs to be able to translate commands to the device. These commands tell the machine how fast to mill, at what revolutions per minute (RPM), and where to mill in 3D space. This is what makes up a toolpath. A Strategy is a combination of tool movements, material properties, software algorithms, and tool characteristics.