Technical Support for
VersaCAMM SP-300 30" Eco-Solvent Inkjet Printer/Cutter
Featured Articles
Error code 0040 (motor error)Error code 0110 (service call)
I can't find a Windows 8/8.1 driver!
Roland Product End of Life Policy
VersaWorks 6 Upgrade
Search SP-300 Documents & Knowledge Base Articles
Expand All | Collapse All
Application & Software Guides ( 5 )
Ink conversion procedure for upgrading to EcoSol Max inks. ColorRip Edition
46.83 KB
Instructions for creating Contour Cut lines in Adobe Illustrator CS
168.72 KB
Procedure for Print - Laminate - Cut in Roland ColorRip
247.44 KB
Print Laminate Cut workflow for the SP-300 printer using ColorRip
794.94 KB
Windows 7 Support Information for color products: VersaWorks, COLORIP, ColorChoice and ColorChoice II.
75.52 KB
Bulletin ( 1 )
This file will assist in color matching on a Roland device. Print the file in your device the pick the closest match and then input the color values back into your design file.
392.38 KB
Driver ( 1 )
Windows 2000, Windows XP
Windows driver for the SP-300 or SP-300v. Only works with these models as they are the only USB style machines.
7.64 MB
Firmware ( 2 )
This zip file contains firmware for the SP series VersaCamm printer cutters. Package contains firmware file, installer application and instructions on installation.
4.06 MB
This zip file contains firmware for the SP series VersaCamm printer cutters. Package contains firmware file, installer application and instructions on installation.
3.97 MB
Maintenance & Calibration Guides ( 1 )
Details how to perform the end user level print cut adjustment to correct print cut alignment issues.
1.37 MB
MSDS ( 4 )
This is a conformity statement to EUs RoHS directive for the ESL3 inks. EcoSOL MAX - ESL3-CY, ESL3-MG, ESL3-YE, ESL3-BK, ESL3-LC, ESL3-LM, ESL3-WH, ESL3-4CY, ESL3-4MG, ESL3-4YE, ESL3-4BK, ESL3-4LC, ESL3-4LM
65.54 KB
Conformity statement to EUs RoHS directive for the SL-CL SOL Cleaning cartridge
39.29 KB
Owner & User Manual ( 9 )
Guidlines for Creating an ICC Profile in ColorRip Software
882.01 KB
Documents set up, operation, cleaning amp; basic trouble shooting of the SP-300 model printer
2.33 MB
Covers set up, operation, cleaning and basic troubleshooting for the SP-300 series printer. This is part 2 of 2
2.83 MB
Covers set up, operation, cleaning and basic troubleshooting for the SP-300 series printer. This is part 1 of 2
2.67 MB
User manual for the TU-2 take up system. Manual includes usage and installation procedures.
2.06 MB
Instructions on how to install and operate the TUC-2 take up system. Updated to include special instructions for the VG-640 VG-540.
2.48 MB
User manual highlights set up, operation, cleaning and basic trouble shooting
3.13 MB
Details operation and installation of the Roland Color RIP 2 software. user guide
1.02 MB
SP-300S Manual del Usuario. SP-300S Users Manual, Espanol.
490.53 KB
Profiles ( 2 )
Profiles for Color RIP 2.0b for waterbased PRO2 printers and printer cutters, FJ-540, CJ-540
0.00 bytes
All profiles set up for the PRO2 and Color RIPv2.0. Multiple profiles for lc lm, Max Inks for Color RIP
0.00 bytes
Sample Files ( 3 )
File has numbers and shapes with multiple cut paths. Perfect for demonstrating the Print and Cut features as well as the Print, Laminate amp; Cut workflow.
7.84 MB
Sample file JMB Transport for SP-300 printers
7.93 MB
File set up for printing and contour cutting for the SP-300v. Can be used with any print and cut device but the artwork reads SP-300V. Great file for demonstrating print and cut workflow as well as printlaminatecut workflow.
6.76 MB
Setup & Install Guides ( 2 )
Details how to get the USB connectivity established between the CPU and the printer.
329.23 KB
Software Updates ( 1 )
Training Videos ( 1 )
Follow this link to the Roland Academy Webinars On-Demand webpage. Then filter through the videos to find a training session that suits your needs.
57.36 KB
Troubleshooting Guides ( 4 )
Document describing issues and solutions relateted to static on Roland devices.
889.66 KB
Este documento está diseñado para proporcionar una descripción general sobre cómo la estática afecta la calidad de impresión en las impresoras Roland de formato ancho.
1.29 MB
Troubleshooting methods for VersaWorks when you have missing cut lines
654.76 KB
Warranty Policies ( 2 )
Roland DGA actualizó la Política de fin de vida útil. Ofreceremos soporte hasta (5) años después de que Roland DGA envíe la última unidad (fecha de descontinuación).
386.73 KB
Roland DGA updated the End of Life Policy. We will offer support to (5) years after the last unit is shipped (discontinued date) from Roland DGA.
275.65 KB
Knowledge Base Articles ( 66 )
Heat transfer media does not adhere to fabric properly.
Current Roland user wants to switch from Eco Solvent inks to dye sublimation inks
Can the print and cut machines cut through Twill?
HELP!! I can't find the driver I need for my Roland!
I need a clear film that is compatible with my eco-solvent printer that I can print film positives.
Chart of color products (EcoSol/UV/Sublimation) that includes the various configurations, ink types and part numbers for ink. This article has been optimized for Mobile viewing.
COLORIP Guide
Is it possible to convert the older SP-300 to a SP-300V tomake it compatiblewithRoland VersaWorks?
The cut path is being clipped on one side of the print
CutContour linein apdf filedisappears.
Suspect crop mark detection issues, cut offset issues
Hard printer failure in the scan direction
Encoder related failure in the scan direction
Wall graphics media either falls off or sticks too aggressively to the wall
How to troubleshoot white banding (or density drop, streaking, ink starvation)
HELP!! I can't find a Windows 7 driver for my machine!!
HELP!! I can't find a Windows8 driver for my machine!!
Internal Error Code 1670595
Is there a way to stop a headwash?
Poor printability; not clinging to glass surface
Printer does not recognize a new ink cartridge or customer has a faulty ink cartridge that causes printing issues.
Motor Error 0001
Motor Error 0004
Motor Error 0005
Motor Error 0008
Motor Error 0009
Motor Error 0010
Motor Error 0040
Motor Error 0040
Motor Error 0050
Motor Error 0080
Motor Error 0090
MOTOR ERROR TURN POWER OFF
My media is buckling is there any way I can prevent this?
My print and cut jobs do not line up. The cut is offset from the print.
My VersaWorks is freezing or crashing
Why do some of my prints on textiles look washed out and others don't?
HTM2 peels off in sections after laundering.
Wall and/or paint damage during removal of WFRV and/or WFRF.
Information about my legacy product
Roland VersaWorks Guide
Roland VersaWorks Guide
Service Call 0002
Service Call 0101
Service Call 0102
Service Call 0103
Service Call 0104
Service Call 0105
Service Call 0106
Service Call 0109
Service Call 0111
SERVICE CALL xxxx
Can I use either of these cleaning cartridges interchangeably?
Can I use either of these cleaning cartridges interchangeably?
Spot color with transparency warning appears when trying to save a file to eps in Adobe Illustrator
The material skews on one side when printing or cutting.
This article contains a link to an instructional video detailing the manual maintenance procedure for the Roland SP-300i and SP-540i printers.
VersaWorks 6 Guide
Interested in upgrading to VersaWorks 6
Versaworks will not print jobs concurrently whenset up withmore than one machine.
FAQ information about VersaWorks, VersaWorks Dual and VersaWorks 6
VersaWorks Measurement Failed Error Code = - 4087
Wall graphics is falling off after a few hours of application.
All Roland devices with a USB, Parallel (LPT), or Serial (COM) port need a driver to communicate with a computer. For Roland products compatible with Apple Macintosh operating systems, a plugin is used with Adobe Illustrator. For Roland devices with an Ethernet port, the output software (e.g. - RIP)includes the driver as part of the application.
When outputting a design to your printer, the software needs to be able to translate commands to the device (such as how much ink to fire and when). These commands tell the machine how fast to feed the material, at what speed the print carriage travels, and what heat settings are needed for the print platen. Other variables include theproperties of thematerial being printed on, how the ink chemsitry reacts to it, how the different process colors of ink blend together to form other colors, and how long the print takes to dry. A Profile is a combination of all of these variables, among others.
Colors are not matching from one panel to the next when printing tiled images