For Richard Childress Racing Wrap Specialists Work Begins Well in Advance of the NASCAR Season Opener

NASCAR racing just kicked off for 2016, but the RCR graphics crew has been working behind the scenes for seven months creating stunning wraps for the new season

Welcome, North Carolina, Feb. 23, 2016 – NASCAR kicked off its 2016 season on February 13 at Daytona International Speedway with a stadium full of die-hard fans wildly cheering the waving of the first green flag. While this year’s Sprint Cup Series schedule is just getting underway, the prep work actually began in July of 2015 for the Richard Childress Racing (RCR) graphics team. That’s when Graphics Manager Nick Woodward and his staff of five started working diligently behind the scenes to design, produce and install new wraps for RCR’s numerous race cars and support vehicles.

“Time is always our number one challenge,” notes Woodward. “We start designing the new vehicle wraps for the coming year in mid-summer, and we’re up against the clock from that moment on. We have a limited window – typically July through October – to come up with the concepts, get sponsor approval, and develop the designs in Illustrator and Photoshop. Then, once that process is complete, we work at an incredibly fast clip to print and install all the wraps needed for the coming season.”

Whereas NASCAR race cars and support vehicles were once painted, teams now use advanced wide-format digital printers to produce vibrant, detailed graphics and wraps quickly and cost effectively. Woodward and his staff of five vehicle wrap specialists rely on seven Roland printers and printer/cutters to get the job done.

“With our Roland printers and fast-drying Eco-Sol MAX 2 inks, we’re able to rapidly produce high quality wraps,” said Woodward. “We laminate everything that we produce, and in most cases, we do so within an hour of printing.”

Over the course of a year, Woodward estimates they’ll print over 120,000 square feet of vinyl at the Richard Childress Racing Graphics Center, a 2,500 square foot graphics facility located on the RCR campus in Welcome, North Carolina. “For the most part, we’re pumping out prints all day long, all the way up to the racing season. We even run our printers through the night, completely unattended,” Woodward added.

Woodward points out that his crew’s wrapping responsibilities don’t end once the season is underway.

“We need to print and install new wraps for each of our race cars prior to every race,” he said. “In addition to all of the wraps for RCR’s primary race cars and back-up cars, we also produce wraps and graphics for our eight haulers and 15 ‘show car’ trailers, as well as the team’s tool boxes and pit boxes.”

According to Woodward, each of RCR’s haulers – massive 18-wheeler trucks that transport the race cars to and from each event – require about 1,600 square feet of media to wrap.

“They provide plenty of additional ‘real estate’ for promoting the brands and products of our sponsors. It typically takes four of our technicians about two days to wrap one of the haulers,” Woodward added. “We usually devote a two-man team and 10 to 12 hours to complete a single 30-foot long show car trailer wrap, with each one requiring approximately 650 square feet of printed media.”

The support vehicle wraps are in addition to all the race car wrap installations the RCR graphics crew performs during the racing season. During a typical week, the team will create a total of 24 car wraps, including wraps for RCR’s high-profile race cars, back-up cars, and a ‘crash kit’ for each vehicle.

This year’s vehicle wrap duties will include the design and installation of a special Roland race car wrap for the NASCAR XFINITY Series race on February 27 in Atlanta, Ga. The No. 33 car, to be driven by rookie of the year contender Brandon Jones, will feature a wrap completely dedicated to the leading wide-format printer manufacturer, incorporating Roland’s logo, colors and graphics.

To learn more about Roland DGA and Roland’s complete product lineup, visit For more information on Richard Childress Racing, visit

About Roland DGA

Roland DGA Corporation serves North and South America as the marketing, sales and distribution arm for Roland DG Corporation. Founded in 1981 and listed on the Tokyo Stock Exchange, Roland DG of Hamamatsu, Japan is a worldwide leader in wide-format inkjet printers for the sign, apparel, textile, packaging and vehicle graphics markets; engravers for awards, personalization and ADA signage; photo impact printers for direct part marking; and 3D printers and CNC milling machines for rapid prototyping, part manufacturing and the medical and dental CAD/CAM industries. Roland DGA is ISO 9001:2008 certified, and Roland DG is ISO 9001:2008 and 14001:2004 certified.

About Richard Childress Racing

Richard Childress Racing ( is a renowned, performance-driven racing, marketing and manufacturing organization. RCR has earned more than 200 victories and 15 championships, including six in the NASCAR Sprint Cup Series with the legendary Dale Earnhardt. RCR was the first organization to win championships in the Sprint Cup Series, NASCAR XFINITY Series and NASCAR Camping World Truck Series. Its 2016 Sprint Cup Series lineup includes two-time NASCAR champion Austin Dillon (No. 3 Dow/American Ethanol/Cheerios Chevrolet), 2011 Brickyard 400 champion Paul Menard (No. 27 Menards Chevrolet) and 2008 Daytona 500 champion and 2013 Brickyard 400 winner Ryan Newman (No. 31 Caterpillar/WIX Filters/Grainger Chevrolet). Its XFINITY Series program includes a multi-driver lineup with Austin Dillon and Paul Menard (No. 2 Rheem/Menards Chevrolet), 2012 Camping World Truck Series Rookie of the Year Ty Dillon (No. 3 Bass Pro Shops/Rheem/WESCO/Red Kap Chevrolet), Rookie of the Year contender Brandon Jones (No. 33 Menards/Nexteer Chevrolet) and Brendan Gaughan (No. 62 South Point Hotel & Casino/WIX Filters Chevrolet).