SOLJET Pro II SC-545EX 54" Eco-Solvent Inkjet Printer/Cutter
Application/ Software Guides
Ink conversion procedure for upgrading to EcoSol Max inks. ColorRip Edition
Procedure for Print - Laminate - Cut in Roland ColorRip
Print Laminate Cut workflow for the SP-300 printer using ColorRip
This document describes the setup and work flow for printing using white ink on the SC-545EX printer and Roland VersaWorks.
Windows 7 Support Information for color products: VersaWorks, COLORIP, ColorChoice and ColorChoice II.
This file will assist in color matching on a Roland device. Print the file in your device the pick the closest match and then input the color values back into your design file.
Maintenance/ Calibration Guides
Printer Maintenance Guide
Media Specification Sheet
PETG Specification Sheet
ESL3-CY, ESL3-MG, ESL3-YE, ESL3-BK, ESL3-LC, ESL3-LM, ESL3-WH, ESL3-MT, ESL3-4CY, ESL3-4MG, ESL3-4YE, ESL3-4BK, ESL3-4LC, ESL3-4LM Safety Data Sheet
This is a conformity statement to EU's RoHS directive for the ESL3 inks. (EcoSOL MAX - ESL3-CY, ESL3-MG, ESL3-YE, ESL3-BK, ESL3-LC, ESL3-LM, ESL3-WH, ESL3-4CY, ESL3-4MG, ESL3-4YE, ESL3-4BK, ESL3-4LC, ESL3-4LM)
Conformity statement to EU's RoHS directive for the SL-CL (SOL Cleaning cartridge)
SOL ink Cleaning Liquid Safety Data Sheet
Owner/ User Manual
Guidlines for Creating an ICC Profile in ColorRip Software
Instructions on how to install and operate the TUC-2 take up system. Updated to include special instructions for the VG-640 & VG-540.
Details operation and installation of the Roland Color RIP 2 software. user guide
Profiles for Color RIP 2.0b for waterbased PRO2 printers and printer cutters, FJ-540, CJ-540
All profiles set up for the PRO2 and Color RIPv2.0. Multiple profiles for lc lm, Max Inks for Color RIP
Collection of EcoSol Max profiles for use with the Color RIP software and the SP300
Offline Updater for ColorRip application - Version 2.2
This updater only applies to users of ver. 3.0 or later. Use the 3.02 offline updater if you are running older version of VersaWorks. NOTE: DGA media profiles are not included in this updater. Profiles are available at www.rolandprofilecenter.com.
Follow this link to the Roland Academy Webinars On-Demand webpage. Then filter through the videos to find a training session that suits your needs.
Troubleshooting methods for VersaWorks when you have missing cut lines
The CoPeck utility version 7.3.0 can be used to get reports from a printe, then be emailed to a dealership or service center for diagnostic purposes.
Copeck Utility - Updated Readme instructions, includes the newer inkjet models: LEF-12i, LEF-200, VG & SG Series.