EGX-20 Desktop Rotary Engraver | Roland DGA
Technical Support for

EGX-20 Desktop Rotary Engraver


Featured Articles
How to install a Roland driver in Windows 7 and Windows Vista
Missing Software


Search EGX-20 Documents & Knowledge Base Articles



Expand All | Collapse All
This document details tooling specs for 3D Relief Engraving
14.99 KB
The following document details tooling specs for ADA Indoor Signage.
22.92 KB
The following document details tooling specs for Ballnose Engraving.
15.67 KB
The following document details tooling specs for burnishing.
20.65 KB
The following document details how to colorfill engraved output
22.99 KB
The following document outlines different cutter types used for engraving.
85.22 KB
The following details tooling used for dovetail engraving
23.04 KB
The following outlines engraving terminology
22.40 KB
Antares Fact Sheet, Rotary Engraving.
22.72 KB
The following outlines how to create multiple plates using Dr. Engrave software
65.24 KB
Quick start set-up guide for Rolands EGX-20 for plastic engraving, scribing and burnishing applications.
272.38 KB
The following document offers detailed instructions on creating a Braille drill job in EngraveLab
129.86 KB
The following document provides info to new users about engraving for profit.
2.45 MB
The following outlines proper procedures to cancel an engraving job for the EGX20.
67.52 KB
Quick set-up guide for Diamond Drag or Burnishing with the EGX20 Engraver.
62.45 KB
The following service bulletin outlines how to set-up, configure and output an engraving file for Rhinestone Motif applications. This is not all inclusive and meant as a guide only.
0.98 MB
Art Center - Roland Education in 3D Video
0.00 bytes
This Datasheet features EngraveLab software by CadLink. Combine this software with one of our EGX Engravers.
340.88 KB
Windows 10
This document PDF lists instructions of how to install Roland drivers on Windows 10.
1.67 MB
OS Compatibility List
48.77 KB
Windows 10, Windows 8
2.5D Driver for Windows 8 Windows 10 32-bit only
50.04 KB
2.5D Driver for Windows 8 Windows 10 64-bit ver 1.20
43.77 KB
Windows 2000
2.5D Driver for Windows 2000 ver. 1.16
67.50 KB
Windows 7
2.5D Driver for Windows 732-bit only
51.78 KB
2.5D Driver for Windows 7 64-bit ver 1.20
43.68 KB
Windows 7, Windows Vista
This document PDF outlines the procedures to install a Roland driver in Windows 7 and Windows Vista.
239.03 KB
Windows Vista
2.5D Driver for Windows Vista 32-bit ver. 1.40
311.00 KB
2.5D Driver for Windows Vista 64-bit ver 1.20
43.19 KB
Windows XP
2.5D Driver for Windows XP 32-bit only ver. 1.40
45.65 KB
GREASE FLOIL G-902 SDS
122.33 KB
Material Data Safety Sheet MSDS for AS-10 Adhesive Sheets
73.44 KB
Users guide for Rolands 3D Engrave software
908.79 KB
Users manual for Rolands Dr Engrave software
601.54 KB
Users manual for EGX20 Engraver
1.24 MB
Users manual for EGX20 Engraver, francais Le suivre est le manuel de lutilisateur pour Roland EGX-20.
2.12 MB
User guide for Rolands EGX 20 Engraver, espanol. Manual del usuario
7.71 MB
Users manual for EngraveLab software
18.11 MB
This document discusses Roland DGAs Depot Repair Policies
183.62 KB
Most Roland devices are supplied with a one year standard manufacturers warranty, but by registering your device within 60 days of purchase, your product could qualify for an extended warranty of up to 3 years.
48.94 KB
This document outlines how to install US-CHIPSYS-C vacuum system in a Roland Engraver
48.46 KB
The following is the software package for 3D Engrave v2.60.
4.16 MB
This is an updater for 3D Engrave ver. 2.70. A previous version of 3D Engrave is required for this updater to work.
41.57 KB
The following is the software package for Dr. Engrave v2.68.
2.79 MB
This is the updater for Dr. Engrave ver. 2.72. A previous version of Dr. Engrave is required for this updater to work.
48.01 KB
The following is the plug-in updater v1.04 for Rhino 4.0 . In order to use this upgrade you must have the software application installed.
4.94 MB
The following is the plug-in updater v1.06 for Rhino 3.0 . In order to use this upgrade you must have the software application installed.
2.38 MB
This is the software package zip file for SFEdit2 and supports R-WearStudio and MetazaStudio software only.
1.83 MB
The ZIP file contains the Roland library of Single Line Font to be used with Dr. Engrave. Installation instructions are included in this download package.
214.01 KB
The following is the software package for Virtual Modela v1.71.
3.87 MB
The following is the updater for Virtual Modela v1.71. In order to use this upgrade you must have the software application installed.
2.08 MB
Cutting 3D Objects Created in Rolands 3D Engrave Software
43.17 KB
The following is a basic set-up and operation video for diamond scribing using Rolands EGX-20 Engraver
12.44 MB
Short Flash video showing installation and operation of medallion accessory for Roland MV-1 and MV-2 vises.
0.00 bytes
Short Flash video showing installation and operation of pen fixture for Roland MX-1 and MV-2 vises for EGX series rotary engravers.
0.00 bytes
Short Flash video showing proper installation and operation of pin jig accessory for the Roland MV-1 and MV-2 vises for Roland EGX series rotary engravers.
0.00 bytes
Short Flash video on proper installation and use of the ruler fixture on the Roland MV-1 and MV-2 vises for Roland EGX series rotary engravers.
0.00 bytes
Short flash video detailing proper installation and setup of the MV-1 vice on the Roland EGX-20 Rotary Engraver.
0.00 bytes
The folllowing is a basic set-up and operation video for plastic engraving using Rolands EGX-20 Engraver.
12.28 MB
Follow this link to the Roland Academy Webinars On-Demand webpage. Then filter through the videos to find a training session that suits your needs.
51.14 KB
Basic workflow for producing a Rhinestone motif template using Roland R-WearStudio.
58.22 KB
Setup and Basic Use of Rolands 3D Engrave Software
43.23 KB
Using Rolands 3D Engrave Software
43.09 KB
The following video outlines how to vectorize a graphic for rhinestone placement using Roland R-WearStudio.
58.43 KB
The following video outlines how to vectorize a graphic using Roland Dr. Engrave.
52.08 KB
The following video outlines how to install a Windows 7 compatible USB driver via the plug and play method.
45.55 KB
The following video outlines how to install a true Windows 7 print driver using the pre-installation method.
48.16 KB
Connecting the EGX-20 to Windows 10, Using a Serial to USB Cable
3.74 MB
Tips and Tricks- getting to know your engraver cutters PDF
169.88 KB
This progrom allows you to send prn, rml, plt or firmware files to your Roland device.
149.25 KB
HELP!! I can't find the driver I need for my Roland!
EGX Series:Daily Care And Maintenance
The EGX-20 power light is flashing, what does that mean?
How to install a Roland driver in Windows 7 and Windows Vista
HELP!! I lost the software CD for my machine!!
All Roland devices with a USB, Parallel (LPT), or Serial (COM) port need a driver to communicate with a computer. For Roland products compatible with Apple Macintosh operating systems, a plugin is used with Adobe Illustrator. For Roland devices with an Ethernet port, the output software (e.g. - RIP)includes the driver as part of the application.
When outputting a design to your engraver or milling machine, the software needs to be able to translate commands to the device. These commands tell the machine how fast to mill, at what revolutions per minute (RPM), and where to mill in 3D space. This is what makes up a toolpath. A Strategy is a combination of tool movements, material properties, software algorithms, and tool characteristics.
Why can't I connect my Roland unit to my new computer? I have a parallel to USB adapter
Windows 7 Software Compatibility List