| BT-125-010 |
Burnish Tool, 1/8in shnkx4.5in lgthx.010in tip |
| BT-125-015 |
Burnish Tool, 1/8in shnkx4.5in lgthx.015in tip |
| BT-125-030 |
Burnish Tool, 1/8in shnkx4.5in lgthx.030in tip |
| C2-125-010K |
Carb. Engr Cutter, .010in, 1/8in Shank, W/Knob |
| C2-125-015K |
Carb. Engr Cutter, .015in, 1/8in Shank, W/Knob |
| C2-125-030K |
Carb. Engr Cutter, .030in, 1/8in Shank, W/Knob |
| C2-125-060K |
Carb. Engr Cutter, .060in, 1/8in Shank, W/Knob |
| C2-125-090K |
Carb. Engr Cutter, .090in, 1/8in Shank, W/Knob |
| C2-125-125K |
Carb. Engr Cutter, .125in, 1/8in Shank, W/Knob |
| C2-125-DGK |
Diamond Gravers, non-rotary, 1/8in shank, W/knob |
| C2-125-KNOB |
Threaded Brass Knob for 1/8in Shank Engr Tools |
| C2-171-010K |
Carb. Tip Engr Cutter, .010in 11/64in Shank, W/Knob |
| C2-171-015K |
Carb. Tip Engr Cutter, .015in 11/64in Shank, W/Knob |
| C2-171-030K |
Carb. Tip Engr Cutter, .030in 11/64in Shank, W/Knob |
| C2-171-060K |
Carb. Tip Engr Cutter, .060in 11/64in Shank, W/Knob |
| C2-171-090K |
Carb. Tip Engr Cutter, .090in 11/64in Shank, W/Knob |
| C2-171-125K |
Carb. Tip Engr Cutter, .125in 11/64in Shank, W/Knob |
| C2-171-DGK |
Diamond Gravers, Non-rotary, 11/64in Shank, W/Knob |
| C2-171-KNOB |
Threaded Brass Knob for 11/64in Shank Engr Tools |
| HS-171-010K |
Hi-Speed Steel Cutter, .010in 11/64in Shank, W/Knob |
| HS-171-015K |
Hi-Speed Steel Cutter, .015in 11/64in Shank, W/Knob |
| HS-171-030K |
Hi-Speed Steel Cutter, .030in 11/64in Shank, W/Knob |
| MV-2 |
Multipurpose Vise for EGX-350/360/400/600/DE-3 |
| PAR-125-060K |
0.060in Parallel Cutter, 1/8in Cut Depth |
| PAR-171-060K |
0.060in Parallel Cutter,11/64in Shank,1/8in Depth |
| US-CHIPSYS-C |
Chip Extraction System w/Accumulator, EGX-30A/350, DE-3, MDX-50 |
| US-FLTRBAG-A3 |
Filter bag (3-pk) for Chip Extraction System |
| US-TL125-KIT |
Engraving Tool Starter Kit, 1/8in Tools w/ Holder |
| US-TL171-KIT |
Engraving Tool Starter Kit, 11/64in Tools w/ Holder |
| ZTT-35 |
T-Slot Table for EGX-350, DE-3 |