Fresadora Dental DWX-52D de 5 Ejes | Roland DGA
Expand All | Collapse All
Windows 10, Windows 8, Windows 7
Dental Driver for DWX-52D, DWX-52DCi DWX-42W. Version 1.32. Contains drivers for both 32 Bit and 64 Bit. Supports Windows 7, 8.1 10. WINX64 is 64 bit folder. WINX86 is 32 Bit folder.
12.53 MB
This update adds a new automatic correction sequence and improves the accuracy of the DWX-52D. VPanel 2.44 must be installed with Firmware 1.40
2.15 MB
This document describes how to replace the collet for the DWX-50, DWX-4, DWX-51D, DWX-52D, DWX-52DC DWX-52DCi The collet should never be removed unless replacement is necessaryPlease see Collet Maintenance for tightening instructions.
791.37 KB
These instructions will guide you through replacing the spindle motor on the DWX-51D, DWX-52D, DWX-52DC DWX-52DCi models. The part number for this spindle is ZS-4D
2.23 MB
DWX-52D Maintenance Manual - Frech
373.90 KB
BOFA DustPRO Base Manual DWX
720.01 KB
BOFA DustPRO universal users Manual
619.68 KB
DWX-52D Mode d’emploi
5.83 MB
This users manual will walk users through proper operation and maintenance procedures for the DWX-52D.
7.83 MB
DWX-52D Accessories
410.46 KB
This setup guide will walk users through the installation and setup steps for proper installation of the DWX-52D.
5.68 MB
MillBox CAM software updates.
44.82 KB
This update grants access to the denture time reduction kit module in MillBox CAM software for DWX-52D users. V4 dated 8162019
79.16 MB
This update grants access to the model time reduction kit module in MillBox CAM software for DWX-52D users.
26.43 MB
This is an installer program for VPanel for DWX-52D, DWX-52DC, DWX-52DCi, DWX-42W. Download the exe file, and double-click setup.exe and follow the instructions as displayed for installation.
137.53 MB
This is an installer program for VPanel for DWX-52D, DWX-52DC, DWX-52DCi, DWX-42W. Download the exe file, and double-click setup.exe and follow the instructions as displayed for installation.
146.05 MB
This is an installer program for VPanel for DWX-52D, DWX-52DC, DWX-52DCi, DWX-42W. Double-click setup.exe and follow the instructions as displayed for installation. Win10 / 8.1. Software supports 32-bit version of Windows. In 64-bit version of Windows
149.69 MB
DWX-52D Spindle Unit Replacement dgs
48.10 KB
This video will guide you through tightening the collet
48.14 KB
This video will guide you through how to prepare the tool or bur before installing.
48.19 KB
Walk-through of how to perform cleaning of your DWX-52D and performing Auto Correction
48.76 KB
This video will guide you through replacing the collet on the DWX-52D and then performing the Auto Calibration procedure using the Vpanel.
48.82 KB
Walk-through of how to perform cleaning of your DWX-52D after the milling has completed
48.75 KB
CA DK1 TR Using the Dedicated Tray 2
48.72 KB
YouTube portal for Global DGSHAPE Video Content
48.85 KB
Dental Driver, VPanel for DWX and DWX-52D Manuals
96.85 MB
A Hole Opens in the Milling Results
Attaching a Workpiece to the Adapter
Automatic Correction Fails
Any issues with heavy usage?
HELP!! I can't find the driver I need for my Roland!
Compressed Air Does Not Come Out
The cut path is being clipped on one side of the print
FAQ's for DWX devices
DWX-52D Daily Maintenance
DWX-52D Spindle Unit Replacement dgs
Error "101D-0010" The cleaning tool cannot be released.
Error Code "****_****" An unknown error occurred.
Error Code "1000-XXXX" The % limit switch was not found.
Error Code "1006-02" The % axis position has been shifted.
Error Code "1017-0000" The front cover was opened.
Error Code "1017-0001" The front cover or the magazine cover was opened.
Error Code "101C-0000" The milling bur sensor was not found.
Error Code "101D-****" The milling bur cannot be released.
Error Code "101E-****" The % milling bur might be broken.
Error Code "101F-****" The % milling bur chucking has slipped out.
Error Code "1020/1021-****" The % milling bur is too long./The % milling bur is too short.
Error Code "1022-****" The % milling bur was not found.
Error Code "1022-0010" The cleaning tool was not found.
Error Code "1023-0000 to 1028-0000" Milling data error.
Error Code "1029-0000" The spindle experienced an overload.
Error Code "102A-0000" The spindle experienced overcurrent.
Error Code "102B-0000" The spindle motor temperature is too high.
Error Code "102D-0000" The spindle cannot be turned.
Error Code "102E-0000" The spindle has collided with the rotary axis unit
Error Code "102E-0001" The changer has collided with the adapter.
Error Code "1030-0000" The dust collector is not working.
Error Code "103B-0000" The automatic correction is not yet finished.
Error Code "103D-0000" Milling data error. The milling bur cannot reach the milling position.
Error Code "1047-****" The machine's internal memory cannot be accessed.
Error Code "1049-****" The adapter with ID number % cannot be released.
Error Code "104A-****"The adapter with ID number % could not be grasped.
Error Code "104B-00**" The adapter with ID number % was not found.
Error Code "104D-00**" An adapter with the same ID was found.
Error Code "104E-****" The % limit switch was not found.
Error Code "104F-02**" The % axis position has been shifted.
Error Code "1050-****" The operation to read a bar code failed.
Looking for general information on tool life
What steps should I take prior to running a milling job?
Initial Operations Are Not Performed or Fail
HELP!! I lost the software CD for my machine!!
No Data Is Being Output to the Machine, or the Machine Will Not Operate Even Though Data Is Being Output
Periodic Maintenance
Information about my legacy product
Can I use either of these cleaning cartridges interchangeably?
The Adapter Rattles
The Cleaning Tool Is Not Effective
The Computer Shuts Down When Connecting Multiple Machines
The Ionizer Is Ineffective (Milling Waste Collects around the Milling Area)
The Milled Surface Is Not Attractive
The Milling Bur Management Information Was Lost
The Operation Button Does Not Respond
The Spindle Does Not Rotate
There Is a Line of Level Difference in the Milling Results
We will be discontinuing live service and support for the DWX-50
When outputting a design to your engraver or milling machine, the software needs to be able to translate commands to the device. These commands tell the machine how fast to mill, at what revolutions per minute (RPM), and where to mill in 3D space. This is what makes up a toolpath. A Strategy is a combination of tool movements, material properties, software algorithms, and tool characteristics.
Can it hold both a disc and a pin type block?
What are the specifications of the compressor?
Interested in the dust collector specifications
Do I really need to purchase this accessory item?