DWX-52D 5-Axis Dental Milling Machine
When installing the machine |
Spindle Run-In (Warm-up) - Page 52
Correction the Milling Machine - Page 53 | |
When replacing the spindle unit | ||
| ||
When the machine has not been used for a prolonged period |
Spindle Run-In (Warm-up) - Page 52 | |
Before milling on days when the ambient temperature is low | ||
| ||
When moving the machine to a different installation site |
Correcting the Milling Machine – Page 53 | |
When the milling position is misaligned | ||
When symptoms such as a hole in the Z direction occur | ||
| ||
Once A month |
Retightening the Collet – Page 59 | |
When the working time of the spindle exceeds 200 hours | ||
| ||
When water or dust accumulates on the regulator |
Regulator Maintenance (Emptying the Drain) – Page 62 | |
| ||
When it is difficult to remove the adapter from the clamp |
Cleaning after Milling Finishes – Page 48 |