EGX-350 Desktop Rotary Engraver | Roland DGA
Technical Support for

EGX-350 Desktop Rotary Engraver


Search EGX-350 Knowledge Base

Select a Category:



Application/ Software Guides

The following outlines how to create multiple plates using Dr. Engrave software
65.24 KB
The following document offers detailed instructions on creating a Braille drill job in EngraveLab
129.86 KB
This document outlines software workflow for producing rhinestone templates for the EGX350 dektop engraver.
1.27 MB
Este manual lo lleva paso a paso a través de un tutorial ilustrado que le muestra y explica exactamente cómo usar el Software.
1.06 MB
Este tutorial explica paso a paso cómo usar el programa EngraveStudio de Roland para el diseño y grabado de un lote de medallas usando una lista de nombres importada de una lista en un archivo de texto.
701.74 KB
Tutorial that goes over the work flow for creating name badges and use variable data with Roland Engrave Studio.
765.70 KB
The following service bulletin outlines how to set-up, configure and output an engraving file for Rhinestone Motif applications. This is not all inclusive and meant as a guide only.
0.98 MB
This manual takes you step-by-step through an illustrated tutorial that shows and explains how to use the software.
1.23 MB
Collateral (artwork)

Art Center - Roland Education in 3D Video
0.00 bytes
Driver

Windows 10
2.5D Driver for Windows 8 & Windows 10 (32-bit only)
31.52 KB
2.5D Driver for Windows 8 & Windows 10 (64-bit) ver 1.20
28.21 KB
This document (PDF) lists instructions of how to install Roland drivers on Windows 10.
1.67 MB
OS Compatibility List
27.89 KB
Windows 2000
2.5D Driver for Windows 2000 ver. 1.16
46.00 KB
Windows 7
2.5D Driver for Windows 7(32-bit only)
36.65 KB
2.5D Driver for Windows 7 (64-bit) ver 1.20
29.17 KB
This document (PDF) outlines the procedures to install a Roland driver in Windows 7 and Windows Vista.
239.03 KB
Windows 8
2.5D Driver for Windows 8 & Windows 10 (32-bit only)
31.52 KB
2.5D Driver for Windows 8 & Windows 10 (64-bit) ver 1.20
28.21 KB
Windows Vista
2.5D Driver for Windows Vista (32-bit) ver. 1.40
292.00 KB
2.5D Driver for Windows Vista (64-bit) ver 1.20
30.80 KB
This document (PDF) outlines the procedures to install a Roland driver in Windows 7 and Windows Vista.
239.03 KB
Windows XP
2.5D Driver for Windows XP (32-bit only) ver. 1.40
31.81 KB

Firmware

The following download includes the latest firmware and procedures for updating the firmware on the Roland EGX-350 Desktop Engraver. Please refer to the PDF for installation instructions.
353.69 KB
Maintenance/ Calibration Guides

GREASE FLOIL G-902 SDS
122.33 KB

Material Data Safety Sheet (MSDS) for AS-10 Adhesive Sheets
73.44 KB
Owner/ User Manual

Users guide for Roland's 3D Engrave software
908.79 KB
Users manual for Roland's Dr Engrave software
601.54 KB
Users manual for Roland's EGX 350 Engraver, English.
2.50 MB
EGX-350 MODE D’EMPLOI, users manual, francais
3.13 MB
Users manual for Roland's EGX 350 Engraver, espanol. Manual de usario
3.17 MB
Users manual for EngraveLab software
18.11 MB
Product Photo

The following zip file contains ADA signage sample images
0.00 bytes
Repair Guides

This document discusses Roland DGA's Depot Repair Policies
183.62 KB
ZS-35 Spindle Unit Replacement Manual (for the EGX-350/360)
742.50 KB
Sales Guide

The following application brief outlines how a Roland engraver can be used for ADA and indoor / outdoor signage
277.38 KB
Setup/ Install Guides

Most Roland devices are supplied with a one year standard manufacturer’s warranty, but by registering your device within 60 days of purchase, your product could qualify for an extended warranty of up to 3 years*.
28.89 KB
This installation and setup guide (PDF) details how to install R-Wear Studio software.
45.87 KB
This outlines hardware set-up for producing rhinestone templates with the EGX350 desktop engraver.
61.57 KB
Quick-start guide to EGX 350 set-up for plastic and rhinestone template engraving; scribing and burnishing.
437.17 KB
T-slot table for the EGX-350/360 Installation Manual.
645.85 KB
Important Notes on Using Roland EngraveStudio and How to Install the Cutter
307.86 KB
Software Updates

The following is the software package for 3D Engrave v2.60.
4.16 MB
This is an updater for 3D Engrave ver. 2.70. A previous version of 3D Engrave is required for this updater to work.
29.25 KB
The following is the software package for Dr. Engrave v2.68.
2.79 MB
This is the updater for Dr. Engrave ver. 2.72. A previous version of Dr. Engrave is required for this updater to work.
35.03 KB
EngraveStudio Updater ver. 2.15. If you have added any tools, save the "C:\Program Files(x86)\Roland EngraveStudio\ToolDatabase\tools.tool_db" file to a different folder prior to updating.
30.75 KB
The following is the plug-in updater v1.04 for Rhino 4.0 . In order to use this upgrade you must have the software application installed.
4.94 MB
The following is the plug-in updater v1.06 for Rhino 3.0 . In order to use this upgrade you must have the software application installed.
2.38 MB
This is the software package (zip file) for SFEdit2 and supports R-WearStudio and MetazaStudio software only.
1.83 MB
The ZIP file contains the Roland library of Single Line Font to be used with Dr. Engrave. Installation instructions are included in this download package.
214.01 KB
This is an updater for R-WearStudio ver. 1.32. A previous version of R-WearStudio must be installed for this work.
31.36 KB
Training videos

Cutting 3D Objects Created in Rolands 3D Engrave Software
29.38 KB
Short Flash video showing installation and operation of medallion accessory for Roland MV-1 and MV-2 vises.
0.00 bytes
Short Flash video showing installation and operation of pen fixture for Roland MX-1 and MV-2 vises for EGX series rotary engravers.
0.00 bytes
Short Flash video showing proper installation and operation of pin jig accessory for the Roland MV-1 and MV-2 vises for Roland EGX series rotary engravers.
0.00 bytes
Short Flash video on proper installation and use of the ruler fixture on the Roland MV-1 and MV-2 vises for Roland EGX series rotary engravers.
0.00 bytes
Short flash video detailing proper installation and setup of the MV-2 vice on the Roland EGX-350 Rotary Engraver.
0.00 bytes
The following video covers the out of box setup and configuration for the Roland EGX-350 Desktop Engraver.
27.40 KB
This video covers the out of box configuration of the Roland EGX-350 Desktop Engraver. This is video 2 of 4.
28.78 KB
This video covers the out of box configuration of the Roland EGX-350 Desktop Engraver. This is video 3 of 4.
28.77 KB
This video covers the out of box configuration of the Roland EGX-350 Desktop Engraver. This is video 4 of 4.
31.13 KB
Follow this link to the Roland Academy Webinars On-Demand webpage. Then filter through the videos to find a training session that suits your needs.
31.09 KB
Basic workflow for producing a Rhinestone motif template using Roland R-WearStudio.
33.58 KB
Setup and Basic Use of Rolands 3D Engrave Software
29.44 KB
Using Rolands 3D Engrave Software
29.31 KB
The following video outlines how to vectorize a graphic for rhinestone placement using Roland R-WearStudio.
33.66 KB
The following video outlines how to vectorize a graphic using Roland Dr. Engrave.
28.96 KB
The following video outlines how to vectorize a graphic image using Roland EngraveStudio.
28.89 KB
The following video outlines how to install a Windows 7 compatible USB driver via the plug and play method.
29.19 KB
The following video outlines how to install a true Windows 7 print driver using the pre-installation method.
29.25 KB
Troubleshooting Guides

Tips and Tricks- getting to know your engraver cutters PDF
169.88 KB
Utilities

This progrom allows you to send prn, rml, plt or firmware files to your Roland device.
149.25 KB