DWX-4 compact dental mill

DWX-4 Dental Milling System Specifications

DWX-4 Milling Machine Specifications
Cuttable Material Zirconia (pre-sintered), Wax, PMMA, Lava™ Ultimate Restorative
Loadablework - piece shape Block Width x Depth: 76×38, Height: 10 to 22 mm
PIN type Width x Depth x Height: Maximum 85 x 40 x 22 mm
Operating speed XYZ axis: 0.24 to 70.8 in./min. (6 to 1800 mm/min.)
Spindle motor Brushless DC motor
Spindle speed 6,000 to 30,000 rpm
Rotary axis travel angle A: ±360°
Number of tools housed 2
Attachable tool Shank diameter: 4 mm, Length: 40 to 55 mm
Compatible compressed air 0.02 to 0.2 MPa
Interface USB (compliant with Universal Serial Bus Specification Revision 1.1)
Control command set RML-1, NC code
Power requirements Voltage and frequency: AC100 to 120 V/220 to 240 V ±10 %, 50/60 Hz

(overvoltage category II, IEC 60664-1)

Required power capacity: 2.0 A (100 to 120 V)/1.0 A (220 to 240 V)
Power consumption Approx. 70 W
Operating noise During operation: 70 dB (A) or less (when not cutting)
During standby: 40 dB (A) or less
External dimensions Width x Depth x Height: 13.4×14.4×16.0 in.

(340×365×405 mm)
Weight 48.5 lbs (22 kg)
Installation Environment Indoor Use, altitude: up to 2000 m
Temperature: 41 to 104 °F (5 to 40 °C)
Relative humidity: 35 to 80 % (no condensation)
Ambient pollution degree: 2 (as specified by IEC 60664-1)
Short-Term Temporary Overvoltage: 1440 V
Long-Term Temporary Overvoltage: 490 V
Included items Power cord, USB cable, Manual, Software Package CD-ROM, Detection pin, Automatic correction jig, Clamp for block workpiece, Hexagonal screwdriver, spanner, Tool holder, Tool positioner, Dust collection hose, Regulator, etc.
System requirements for included EasyShape CAM software
Operating System Windows 7 or Windows 8.1 (32 or 64 Bit)
Recommended CPU i7 or better *AMD not recommended
Memory (RAM) 4GB or more

*More RAM may be required if running multiple instances of EasyShapeCAM

 4GB of RAM will require a 64-Bit OS
Graphics Card NVIDIA GT series graphics card with a minimum 1GB or more of dedicated video memory *Non-Shared/Dynamic Memory - AMD/ATI graphics cards not recommended
Hard Drive Hard Disc Drive (HDD) - Discretionary based on how many STL Job Files are stored.

Solid State Drive (SDD) - May help read / write times slightly but is not necessary