Base de conocimientos Article
CAMM-1 GX-24 24" Vinyl Cutter
Cargo
GX-24 Motor Error
Síntoma
My GX-24 shows a motor error on the display
Solución
Symptom
My GX-24 shows a motor error on the display.
Cause
A heavy load occured during cutting.
Solution
My GX-24 shows a motor error on the display.
Cause
A heavy load occured during cutting.
Solution
| A heavy load was placed on the motor, and the operation stopped. Check the media supply in the back of the cutter to make sure it feeds properly. | |
| Turn off the power, lower the loading lever, and load the material again. Reference:Loading the Material | |
Modificado
May 11, 2020