When performing an autodetect for media thickness, the printer pauses and lowers the carriage before moving to the target location, after the "Move to Destination" button is clicked.
Print from IU-1000F with bad banding in clear and skewing of image.
When attempting to move the carriage - the printer throws an Error Code 6 indicating that the print carriage is too low.
When printing on IU-1000F, the printer hisses much louder when printing the second side.
Error Codes with causes and solutions for the IU-1000F
The following steps should be taken when powering down the IU-1000F system. It is important that these steps are followed correctly to insure proper shut down.
The following sequence should be followed when powering up the IU-1000F printer and Print Control Software. It is important that this procedure is followed correctly to insure proper operation of the printer. This procedure should be the first step when troubleshooting any Error Codes the printer displays, unless otherwise noted.
When I make a selection like profile, or spot color, Production Manager does not seem to hold my choices.
Assigning the correct spot color to your designated colors.
How do I print white/gloss/primer in Production Manager?