Article | Roland
  1. Inicio
  2. Servicio y Soporte Roland DGA Care
  3. Sistemas CAD/CAM Dentales
  4. DWX-42W Wet Dental Mill
  5. Article
Página de Inicio de Soporte      Registro de Garantía      Enviar E-mail a Soporte      Foros de Usuario
Base de conocimientos Article

DWX-42W Wet Dental Mill (Wood Crate)

Cargo
"1034-0000" The coolant tank is not installed
Síntoma
"1034-0000" The coolant tank is not installed.
Solución
Situation/Error Cause
  • The coolant tank has been removed during coolant operation.
Procedure
  1. Install the coolant tank.
Push the coolant tank to the point where you feel a click

Point
Align the label affixed to the right side of the tank with the  label affixed to the machine.

Important
Move the coolant tank slowly. Forcefully moving the coolant tank may cause the coolant to spray out.
  1. According to the situation, perform the operations shown below
  • When the error occurred during milling.
    • Press the operation button on the built-in panel. Milling will resume.
  • When the error occurred outside of milling.
    • Hold down the operation button on the built-in panel. This will clear the error.
Modificado
April 30, 2020
ARRIBA