DWX-42W Wet Dental Mill (Wood Crate)

"101F-000*" The % milling bur chucking has slipped out

"101F-000*" The % milling bur chucking has slipped out. The milling bur stocker number (1 to 7) is displayed for %

Situation/Error Cause 1

• The milling bur has exceeded its service life "P. 72 "Replacing Milling Burs"

Procedure

1. Hold down the operation button on the built-in panel. This will clear the error.
2. Replace the milling bur with a new one.
3. Perform collet maintenance. "P. 44 "Collet Maintenance, Cleaning of Dummy Pin, and Checking of Coolant Flow Rate

Situation/Error Cause 2

• The milling conditions are too strict.

Procedure

1. Hold down the operation button on the built-in panel. This will clear the error.
2. Review the CAM settings and the shape specified in the CAD data.

If the Error Occurs Again

• The collet has worn out, leading to a decrease in its retention capabilities.

Procedure

1. Replace the collet. "P. 83 "Replacing the Collet"
2. Perform automatic correction. "P. 56 "Correcting the Milling Machine"

April 30, 2020