Aviso Importante
Aviso Temporal de Servicio: Controladores y Descargas — Actualmente estamos realizando tareas de mantenimiento en nuestro Centro de Controladores y Descargas para garantizar la seguridad y confiabilidad continuas de nuestros servicios en línea.
Aviso Temporal de Servicio: Controladores y Descargas
Actualmente estamos realizando tareas de mantenimiento en nuestro Centro de Controladores y Descargas para garantizar la seguridad y confiabilidad continuas de nuestros servicios en línea. Durante este periodo, es posible que algunos programas de software, controladores, manuales y otros recursos descargables no estén disponibles temporalmente.
Prevemos restablecer el acceso a más tardar el lunes 26 de octubre de 2026. Sin embargo, el periodo de mantenimiento podría extenderse si se requiere trabajo adicional.
Si necesita asistencia inmediata para obtener software, controladores o documentación, ingrese su número de serie a continuación para abrir un caso de soporte. Nuestro equipo de soporte con gusto le ayudará con opciones alternativas.
Le ofrecemos una sincera disculpa por cualquier inconveniente y agradecemos su paciencia y comprensión mientras trabajamos para restablecer estos servicios lo antes posible.
Equipo de Atención al Cliente de Roland DGA
Soporte Técnico Para
Impresora/Cortadora de Inyección de Tinta UV-LED VersaUV® LEC-300 de 76 cm
Artículos relacionados
Búsqueda LEC-300 Documents & Knowledge Base Articles
Expandir Todo | Desplegar Todo
Application & Software Guides ( 21 )
Test result of Adhesion Promoter or Primer for VersaUV printers
496.28 KB
This document describes the process for calibrating or linerizing a print mode in Roland VersaWorks.
1.81 MB
Instructions for creating Contour Cut lines in Adobe Illustrator CS
168.72 KB
This document details installation instructions for placing the Roland Color Library into Corel.
1.91 MB
VersaUV LEC-300A LEC-330 - Advanced File Preparation and Printing Techniques with VersaWorks
3.00 MB
VersaUV LEC-300 and LEC-330 - Label Workflow and Simplified White and Clear Gloss ink guide
4.60 MB
Preparacion Avanzada de archivos y tecnicas de impresion para impresoras cortadoras VersaUV
1.46 MB
This document outlines the procedures to load the Roland VersaWorks swatches into Adobe Indesign.
1.64 MB
This document describes the setup and work flow for printing using white ink on the SC-545EX printer and Roland VersaWorks.
205.23 KB
This document outlines the procedure for printing gray using Roland VersaWorks RIP application.
1.04 MB
This document explains how to do advanced file preparation for UV printers, such as gradients and halftonesraster for gloss and white.
2.99 MB
This document describes the use of Special Color and Named Color Replacement in Roland VersaWorks.
399.01 KB
First in the series Know Before You Print, this document explains when and why to use the test print and cleaning feature.
1.73 MB
Details how to use the Roland Color System for perfect matching color out of Illustrator.
2.08 MB
Instructions on how to use the Custom Cut feature in VersaWorks. This instruction set is for configuring VersaWorks to a determined page size to increase cut accuracy.
2.44 MB
The following document covers the step-by-step instruction on how to create a shrinkwrap prototype with VersaUV printers.
1.25 MB
This document outlines the procedure for performing a Clean Reinstallation of Roland VersaWorks.
51.83 KB
This document offers tips and tricks on how to use VersaWorks effectively in conjunction with design applications such as Illustrator and Photoshop.
15.11 MB
Windows 7 Support Information for color products: VersaWorks, COLORIP, ColorChoice and ColorChoice II.
75.52 KB
Application Resources ( 1 )
Copeck Utility – Instructions about using the CoPeck tool. Includes the list of Roland Printer models.
385.60 KB
Bulletin ( 1 )
ESM-FRSB and ESM-BOSB flame retardancy testing results.
46.69 KB
Document ( 2 )
Cómo la Tecnología de Inyección de Tinta de la UV-LED Aumenta las Ganancias de las Imprentas Flexográficas
505.66 KB
spreadsheet referenced in job log part 2 webinar.
50.00 KB
Firmware ( 2 )
LEC Series Firmware version 7.50 for models LEC-300300A330540
3.27 MB
LEC Series Firmware version 7.30 for models LEC-300300A330540
3.27 MB
Maintenance & Calibration Guides ( 10 )
This guide explains procedure for adjusting the bidirectional calibration for VersaUV inkjet devices.
1.30 MB
Details how to ensure correct print quality by using the BiDirectional Adjustment.
1.12 MB
This document details how to perform the Media Feed Calibration. This test is crucial in removing banding from prints.
1.17 MB
Details how to perform the end user level print cut adjustment to correct print cut alignment issues.
1.37 MB
This test pattern shows how the print heads are firing and can explain many print quality issues. This document details how to perform the test print and correct possible issues that may arise.
2.27 MB
Maintenance checklist for the LEC-300, LEC-300A, LEC-330 and LEC-540.
101.75 KB
Details replacement of the sheet cutting blade for all print and cut devices.
478.01 KB
VersaUV Print Head Maintenance Guide. This document overviews best practices for maintaining print head quality on the VersaUV products.
1.30 MB
MSDS ( 11 )
This is a conformity statement to EUs RoHS directive for the EUV3 inks. EUV3-CY, EUV3-MG, EUV3-YE, EUV3-BK, EUV3-WH, EUV3-GL
274.25 KB
This is a conformity statement to EUs RoHS directive for the EUVS inks.
EUVS-CY, EUVS-MG, EUVS-YE, EUVS-BK, EUVS-WH
267.57 KB
This is a conformity statement to EUs RoHS directive for the EUV inks.
EUV-CY, EUV-MG, EUV-YE, EUV-BK, EUV-WH, EUV-GL
281.46 KB
Conformity statement to EUs RoHS directive for the SL-CL SOL Cleaning cartridge
39.29 KB
Owner & User Manual ( 12 )
Users Manual for the BOFA unit. For LEC-300330540 LEJ-640 and LEJ-640FT.
629.45 KB
This guide outlines the procedures for creating perforated cuts and foldcrease lines on the LEC series printer cutters.
1.29 MB
Hoja De Datos - PrintPRO Base para EcoUV impresora.
1.47 MB
LEC-300, LEC-300A, LEC-330 - Users Manual Supplement. Before using, be sure to read this.
2.20 MB
This guide describes the white ink workflow on XC-540, including the new Single Pass printing mode.
19.07 MB
Details end user set up and daily use as well as cleaning information. LEC300 users manual
4.38 MB
Users Manual, LEC-300, Spanish or Manual de Usuario para el LEC-300
3.36 MB
VersaUV LEC-300 White and Clear Gloss Ink Guide Rev. 2
4.89 MB
All information for basic set up and use of the Versaworks software in Spanish
0.98 MB
Product Info Guide ( 1 )
The following document provides info on the RWear Studio software program
428.69 KB
Profiles ( 1 )
Zip file contains a new profile for LEC-300300A with Eco-UVS inks. This new profile produces a smoother print surface.
0.00 bytes
Sample Files ( 2 )
This Zip file contains a variety of PDF files that can be used when submitting print samples to Roland for evaluation. Use the appropriate file to create your sample.
Please follow the enclosed instructions when printing and sending the test file.
8.59 MB
Service Manual & Notes ( 1 )
Setup & Install Guides ( 3 )
This document describes the procedure to install the LEC-300, LEC-300A, LEC-330, LEC-540 and LEJ-640 with EcoUV S inks.
2.53 MB
Setup guide for the LEC-300. This describes the setup tasks and important conditions about the installation
location that must be met in order to enable use of this machine.
2.44 MB
This document outlines the procedures to install RVW printer drivers manually in Windows7.
2.01 MB
Software Guides ( 2 )
Software Updates ( 3 )
This CorelDraw X5 swatch file includes the swatch for doing PerfCut. Please copy the unzipped .xml file into the My Palettes folder under My Documents.
342.00 bytes
This is the software package zip file for SFEdit2 and supports R-WearStudio and MetazaStudio software only.
1.83 MB
Training Videos ( 13 )
This video outlines the process of making a network connection to a Roland Printercutter.
54.30 KB
This video explains the PerfCut feature in VersaWorks and how to use it.
56.71 KB
Only the VersaCAMM VS and Soljet Pro LEC can perform printcut jobs with a takeup system This video covers hardware and software setup for performing printcut jobs using a takeup reel.
51.38 KB
Tutorial video for printing in VersaWorks with CMYK, Metallic Silver and White in Single-Pass and Dual-Pass.
56.27 KB
Follow this link to the Roland Academy Webinars On-Demand webpage. Then filter through the videos to find a training session that suits your needs.
57.43 KB
Basic workflow for producing a Rhinestone motif template using Roland R-WearStudio.
64.53 KB
Tutorial video for selecting the proper print modes in VersaWorks when printing with CMYK, White and Metallic Silver on clear media.
55.33 KB
Video for working with transparencies in Adobe Illustrator specifically for VersaWorks original. Certain design elements in Illustrator can cause cut lines to disappear in VersaWorks original.
70.96 KB
This video outlines how to troubleshoot cutlines from Adobe Illustrator for Roland VersaWorks.
53.31 KB
The video outlines how to perform Roland VersaWorks update via Roland@Net and Offline updater.
53.31 KB
This video will walk you through the steps of using the Roland System Color Library with CorelDRAW.
17.57 MB
This video outlines the process to use variable data printing in VersaWorks.
64.48 KB
The following video outlines how to vectorize a graphic for rhinestone placement using Roland R-WearStudio.
64.70 KB
Troubleshooting Guides ( 6 )
How to VerifyReset the TCPIP Connection. For all nework based printers.
2.02 MB
Document describing issues and solutions relateted to static on Roland devices.
889.66 KB
Este documento está diseñado para proporcionar una descripción general sobre cómo la estática afecta la calidad de impresión en las impresoras Roland de formato ancho.
1.29 MB
Troubleshooting methods for VersaWorks when you have missing cut lines
654.76 KB
This document outlines the troubleshooting procedures for VersaWorks crashing or freezing lock up.
609.10 KB
Knowledge Base Articles ( 20 )
Imperfections in the UV Gloss coating,or specks
Important notes about LEC: Ink solidification inside the cartridge
Internal Error Code 1940086
I have short media clamps installed but my LEC-300 won't do a sheet cut because it believes I have long media clamps installed.
Motor Error 0001
Motor Error 0004
Motor Error 0008
Motor Error 0009
Motor Error 0040
Motor Error 0080
Motor Error 0090
MOTOR ERROR TURN POWER OFF
My print and cut jobs do not line up. The cut is offset from the print.
Roland VersaWorks Guide
Guide to RVW settings when printing white on clear material.
SERVICE CALL xxxx
Can I use either of these cleaning cartridges interchangeably?
This document provides the correct TU, HU and BU models for the various printer models where applicable.
When outputting the CMYK print file and Gloss print file separately, the CMYK print does not match the Gloss print in feed direction. Why?
Windows 7 Software Compatibility List
Obtenga lo último en Software, Firmware y Manuales
Visite el Centro de Descargas Roland DG