JWX-10 Jewelry Wax Model Maker | Roland DGA

JWX-10 Jewelry Wax Model Maker


Búsqueda JWX-10 Base de conocimientos

Seleccionar una Categoría:



Application/ Software Guides

This document details how to diamond scribe using the MDX-40 and JWX-10 in addition to required accessories.
658.56 KB
This is the RU Workshop manual for the JWX10. This covers tooling, different file formats, ProtoWizard, machine set-up, maintenance and additional resources
11.81 MB

Windows 10
2.5D Driver for Windows 8 & Windows 10 (32-bit only)
31.52 KB
2.5D Driver for Windows 8 & Windows 10 (64-bit) ver 1.20
28.21 KB
OS Compatibility List
27.89 KB
Windows 2000
2.5D Driver for Windows 2000 ver. 1.16
46.00 KB
Windows 7
2.5D Driver for Windows 7(32-bit only)
36.65 KB
2.5D Driver for Windows 7 (64-bit) ver 1.20
29.17 KB
This document (PDF) outlines the procedures to install a Roland driver in Windows 7 and Windows Vista.
239.03 KB
Windows 8
2.5D Driver for Windows 8 & Windows 10 (32-bit only)
31.52 KB
2.5D Driver for Windows 8 & Windows 10 (64-bit) ver 1.20
28.21 KB
Windows Vista
2.5D Driver for Windows Vista (32-bit) ver. 1.40
292.00 KB
2.5D Driver for Windows Vista (64-bit) ver 1.20
30.80 KB
This document (PDF) outlines the procedures to install a Roland driver in Windows 7 and Windows Vista.
239.03 KB
Windows XP
2.5D Driver for Windows XP (32-bit only) ver. 1.40
31.81 KB
Firmware

JWX-10 Firmware ver 1.90
341.89 KB
Maintenance/ Calibration Guides

When using ProtoWizard and ring cut appears shifted, use this document to correct this error. Please note the ProtoWizard set-up procedure should be done prior to cutting a ring
151.19 KB
After cutting the rotary alignment test piece, the Z-Axis may need to be adjusted slightly so the test piece comes out to 8mm thickness. Please note the ProtoWizard set-up procedure would have to be done prior to cutting a ring.
194.27 KB
Owner/ User Manual

Users manual for JWX 10 English
779.25 KB
Users manual, JWX 10, francais
883.24 KB
Users manual for JWX 10, espanol
1.30 MB
Repair Guides

This document discusses Roland DGA's Depot Repair Policies
183.62 KB
Setup/ Install Guides

Step by step instructions for installing Roland JewelStudio, getting started, configuring profile settings, explanation of user interface, using the mouse with the JewelStudio software, and explanations of each tabs functions.
2.06 MB
Installation instructions and files required for Proto Wizard set-up with the JWX10
5.66 MB
Software Updates

This is an updater for 3D Engrave ver. 2.70. A previous version of 3D Engrave is required for this updater to work.
29.25 KB
This is the updater for Dr. Engrave ver. 2.72. A previous version of Dr. Engrave is required for this updater to work.
35.03 KB
This is the updater for the Modela Player 4 ver. 2.12. Modela Player 4 must be installed prior to applying this update.
27.78 KB
The following is the plug-in updater v1.04 for Rhino 4.0 . In order to use this upgrade you must have the software application installed.
4.94 MB
Training videos

The following video outlines how to install a Windows 7 compatible USB driver via the plug and play method.
29.19 KB
The following video outlines how to install a true Windows 7 print driver using the pre-installation method.
29.25 KB
Troubleshooting Guides

This document discusses deleting or canceling a job that has been already sent to the machine. The procedure is the same for the MDX-15/20 & 40, 40A, JWX-10 and covers clearing the machine and computer.
74.06 KB
The following document covers possible communication issues that may be induced by Windows power save features ranging from laptops to desktop computers.
248.71 KB
Utilities

This progrom allows you to send prn, rml, plt or firmware files to your Roland device.
149.25 KB