EGX-600 Professional Rotary Engraver | Roland DGA

EGX-600 Professional Rotary Engraver


Búsqueda EGX-600 Base de conocimientos

Seleccionar una Categoría:



Application/ Software Guides

The following outlines how to configure and output an ADA Braille and Pictogram files from EngraveLab v6.1-7.1 to a Roland Engrave, models EGX-300, EGX-400 and EGX-500
503.15 KB
This document details tooling specs for 3D Relief Engraving
14.99 KB
The following document details tooling specs for ADA/ Indoor Signage.
22.92 KB
The following document details tooling specs for Ballnose Engraving.
15.67 KB
The following document details tooling specs for burnishing.
20.65 KB
The following document details how to colorfill engraved output
22.99 KB
The following document outlines different cutter types used for engraving.
85.22 KB
The following details tooling used for dovetail engraving
23.04 KB
The following outlines engraving terminology
22.40 KB
Antares Fact Sheet, Rotary Engraving.
22.72 KB
The following outlines how to create multiple plates using Dr. Engrave software
65.24 KB
The following document offers detailed instructions on creating a Braille drill job in EngraveLab
129.86 KB
The following document provides info to new users about engraving for profit.
2.45 MB
The following service bulletin outlines how to set-up, configure and output an engraving file for Rhinestone Motif applications. This is not all inclusive and meant as a guide only.
0.98 MB
How to perform surface leveling with the EGX-600/400.
61.36 KB
This document details which USB to Serial adapters will work with Roland units (serial ports).
106.95 KB
Collateral (artwork)

Art Center - Roland Education in 3D Video
0.00 bytes

Windows 10
2.5D Driver for Windows 8 & Windows 10 (32-bit only)
31.52 KB
2.5D Driver for Windows 8 & Windows 10 (64-bit) ver 1.20
28.21 KB
This document (PDF) lists instructions of how to install Roland drivers on Windows 10.
1.67 MB
OS Compatibility List
27.89 KB
Windows 2000
2.5D Driver for Windows 2000 ver. 1.16
46.00 KB
Windows 7
2.5D Driver for Windows 7(32-bit only)
36.65 KB
2.5D Driver for Windows 7 (64-bit) ver 1.20
29.17 KB
This document (PDF) outlines the procedures to install a Roland driver in Windows 7 and Windows Vista.
239.03 KB
ME-US3 USB-to-Serial Cable Driver for Windows ver. 1.10
31.80 KB
Windows 8
ME-US3 USB-to-Serial Cable Driver for Windows ver. 1.10
31.80 KB
2.5D Driver for Windows 8 & Windows 10 (32-bit only)
31.52 KB
2.5D Driver for Windows 8 & Windows 10 (64-bit) ver 1.20
28.21 KB
Windows Vista
2.5D Driver for Windows Vista (32-bit) ver. 1.40
292.00 KB
2.5D Driver for Windows Vista (64-bit) ver 1.20
30.80 KB
ME-US3 USB-to-Serial Cable Driver for Windows ver. 1.10
31.80 KB
This document (PDF) outlines the procedures to install a Roland driver in Windows 7 and Windows Vista.
239.03 KB
Windows XP
2.5D Driver for Windows XP (32-bit only) ver. 1.40
31.81 KB
ME-US3 USB-to-Serial Cable Driver for Windows ver. 1.10
31.80 KB

Firmware

The following is the most current firmware update for the EGX400 and EGX-600 engraver, version 1.60. Please refer to the README.txt file for update instructions.
312.24 KB
Maintenance/ Calibration Guides

GREASE FLOIL G-902 SDS
122.33 KB

Material Data Safety Sheet (MSDS) for AS-10 Adhesive Sheets
73.44 KB
Owner/ User Manual

Users guide for Roland's 3D Engrave software
908.79 KB
Users manual for Roland's Dr Engrave software
601.54 KB
Users manual for Roland's EGX400 and EGX600 Engravers
2.04 MB
Users guide for Roland's EGX-400 and EGX-600 Engravers, francais. Le suivre est le manuel de l'utilisateur pour Roland EGX400/ EGX600
3.37 MB
Users manual for EGX-400 and EGX-600 engravers.
2.94 MB
Users manual for EngraveLab software
18.11 MB
Product Photo

The following zip file contains ADA signage sample images
0.00 bytes
Repair Guides

This document discusses Roland DGA's Depot Repair Policies
183.62 KB
Sales Guide

The following application brief outlines how a Roland engraver can be used for ADA and indoor / outdoor signage
277.38 KB
Sales videos

Full 3 Side Ring Video
46.43 MB
Setup/ Install Guides

This guide covers setup for producing Raster Braille signage using Accent Signage Systems Raster Braille system. Also covered is the configuration of the Auto Raster Inserter and Software overview using EngraveLab and FlexiEngrave.
2.45 MB
Installation guide for the USB-serial cable.
1.02 MB
Most Roland devices are supplied with a one year standard manufacturer’s warranty, but by registering your device within 60 days of purchase, your product could qualify for an extended warranty of up to 3 years*.
28.89 KB
This installation and setup guide (PDF) details how to install R-Wear Studio software.
45.87 KB
Quick start guide to EGX-400 and EGX-600 set-up. For nosecone, non-nosecone and scribing applications
353.47 KB
This document outlines how to install US-CHIPSYS-C vacuum system in a Roland Engraver
48.46 KB
ZAD-600 Vacuum Adapter Installation Guide
222.28 KB
Software Updates

The following is the software package for 3D Engrave v2.60.
4.16 MB
This is an updater for 3D Engrave ver. 2.70. A previous version of 3D Engrave is required for this updater to work.
29.25 KB
The following is the software package for Dr. Engrave v2.68.
2.79 MB
This is the updater for Dr. Engrave ver. 2.72. A previous version of Dr. Engrave is required for this updater to work.
35.03 KB
Software updater for Modela Player version 4.05.
1.83 MB
The following is the plug-in updater v1.04 for Rhino 4.0 . In order to use this upgrade you must have the software application installed.
4.94 MB
The following is the plug-in updater v1.06 for Rhino 3.0 . In order to use this upgrade you must have the software application installed.
2.38 MB
This is the software package (zip file) for SFEdit2 and supports R-WearStudio and MetazaStudio software only.
1.83 MB
The ZIP file contains the Roland library of Single Line Font to be used with Dr. Engrave. Installation instructions are included in this download package.
214.01 KB
This is an updater for R-WearStudio ver. 1.32. A previous version of R-WearStudio must be installed for this work.
31.36 KB
The following is the software package for Virtual Modela v1.71.
3.87 MB
The following is the updater for Virtual Modela v1.71. In order to use this upgrade you must have the software application installed.
2.08 MB
Training videos

The following is a basic set-up and operation video for producing ADA/ Braille signage using Roland's EGX-400 and EGX-600 Engraver. Demonstrated software is CADLink's EngraverLab, and Raster Pen from Accent Signage Systems.
16.14 MB
Cutting 3D Objects Created in Rolands 3D Engrave Software
29.38 KB
The following is a basic set-up and operation video for diamond scribing using the EGX-400 and EGX-600 Engraver.
12.42 MB
Short Flash video showing installation and operation of medallion accessory for Roland MV-1 and MV-2 vises.
0.00 bytes
Short Flash video showing installation and operation of pen fixture for Roland MX-1 and MV-2 vises for EGX series rotary engravers.
0.00 bytes
Short Flash video showing proper installation and operation of pin jig accessory for the Roland MV-1 and MV-2 vises for Roland EGX series rotary engravers.
0.00 bytes
Short Flash video on proper installation and use of the ruler fixture on the Roland MV-1 and MV-2 vises for Roland EGX series rotary engravers.
0.00 bytes
Short flash video detailing proper installation and setup of the MV-2 vice on the Roland EGX-400 and EGX-600 Rotary Engraver.
0.00 bytes
The following is a basic set-up and operation video for plastic engraving using the EGX-400 and EGX-600 Engraver.
13.94 MB
Follow this link to the Roland Academy Webinars On-Demand webpage. Then filter through the videos to find a training session that suits your needs.
31.09 KB
Basic workflow for producing a Rhinestone motif template using Roland R-WearStudio.
33.58 KB
Setup and Basic Use of Rolands 3D Engrave Software
29.44 KB
Using Rolands 3D Engrave Software
29.31 KB
The following video outlines how to vectorize a graphic for rhinestone placement using Roland R-WearStudio.
33.66 KB
The following video outlines how to vectorize a graphic using Roland Dr. Engrave.
28.96 KB
The following video outlines how to install a Windows 7 compatible USB driver via the plug and play method.
29.19 KB
The following video outlines how to install a true Windows 7 print driver using the pre-installation method.
29.25 KB
Troubleshooting Guides

Tips and Tricks- getting to know your engraver cutters PDF
169.88 KB
Utilities

This progrom allows you to send prn, rml, plt or firmware files to your Roland device.
149.25 KB