Soporte Técnico Para
EGX-400 Professional Rotary Engraver
Artículos relacionadosHow to install a Roland driver in Windows 7 and Windows Vista
I can't find a Windows 8/8.1 driver!
Roland Product End of Life Policy
Búsqueda EGX-400 Documents & Knowledge Base Articles
Expandir Todo | Desplegar Todo
Application & Software Guides ( 16 )
No Description Available.
This document details tooling specs for 3D Relief Engraving
The following document details tooling specs for ADA Indoor Signage.
The following document details tooling specs for Ballnose Engraving.
The following document details tooling specs for burnishing.
The following document details how to colorfill engraved output
The following document outlines different cutter types used for engraving.
The following details tooling used for dovetail engraving
The following outlines engraving terminology
Antares Fact Sheet, Rotary Engraving.
The following outlines how to create multiple plates using Dr. Engrave software
The following document offers detailed instructions on creating a Braille drill job in EngraveLab
The following document provides info to new users about engraving for profit.
The following service bulletin outlines how to set-up, configure and output an engraving file for Rhinestone Motif applications. This is not all inclusive and meant as a guide only.
How to perform surface leveling with the EGX-600400.
This document details which USB to Serial adapters will work with Roland units serial ports.
Collateral (Artwork) ( 1 )
Document ( 1 )
This Datasheet features EngraveLab software by CadLink. Combine this software with one of our EGX Engravers.
Driver ( 12 )
This document PDF lists instructions of how to install Roland drivers on Windows 10.
OS Compatibility List
Windows 10, Windows 8
2.5D Driver for Windows 8 Windows 10 32-bit only
2.5D Driver for Windows 8 Windows 10 64-bit ver 1.20
2.5D Driver for Windows 2000 ver. 1.16
2.5D Driver for Windows 732-bit only
2.5D Driver for Windows 7 64-bit ver 1.20
Windows 7, Windows Vista
This document PDF outlines the procedures to install a Roland driver in Windows 7 and Windows Vista.
Windows 8, Windows 7, Windows Vista, Windows XP
ME-US3 USB-to-Serial Cable Driver for Windows ver. 1.10
2.5D Driver for Windows Vista 32-bit ver. 1.40
2.5D Driver for Windows Vista 64-bit ver 1.20
2.5D Driver for Windows XP 32-bit only ver. 1.40
FAQ ( 1 )
Firmware ( 1 )
The following is the most current firmware update for the EGX400 and EGX-600 engraver, version 1.60. Please refer to the README.txt file for update instructions.
MSDS ( 2 )
Material Data Safety Sheet MSDS for AS-10 Adhesive Sheets
GREASE FLOIL G-902 SDS
Owner & User Manual ( 6 )
Users guide for Rolands 3D Engrave software
Users manual for Rolands Dr Engrave software
Users manual for Rolands EGX400 and EGX600 Engravers
Users guide for Rolands EGX-400 and EGX-600 Engravers, francais. Le suivre est le manuel de lutilisateur pour Roland EGX400 EGX600
Users manual for EGX-400 and EGX-600 engravers.
Users manual for EngraveLab software
Product Info Guide ( 6 )
ADA signage application info. RASD-INDORADA-01
The following zip files contains sample ADA signage images
The following documenbt provides the features list of EngraveLab Expert v8.0
This following is a full product catalog including brief machine descriptions and pricing for all machines sold in the jewelry market
This includes description of machines and applications, along with pricing and machine specifications.
The following document provides info on the RWear Studio software program
Sales Guide ( 1 )
The following application brief outlines how a Roland engraver can be used for ADA and indoor outdoor signage
Sales Videos ( 1 )
Setup & Install Guides ( 7 )
This guide covers setup for producing Raster Braille signage using Accent Signage Systems Raster Braille system. Also covered is the configuration of the Auto Raster Inserter and Software overview using EngraveLab and FlexiEngrave.
Installation guide for the USB-serial cable.
This installation and setup guide PDF details how to install R-Wear Studio software.
Quick start guide to EGX-400 and EGX-600 set-up. For nosecone, non-nosecone and scribing applications
Most Roland devices are supplied with a one year standard manufacturers warranty, but by registering your device within 60 days of purchase, your product could qualify for an extended warranty of up to 3 years.
This document outlines how to install US-CHIPSYS-C vacuum system in a Roland Engraver
ZAD-600 Vacuum Adapter Installation Guide
Software Updates ( 12 )
The following is the software package for 3D Engrave v2.60.
This is an updater for 3D Engrave ver. 2.70. A previous version of 3D Engrave is required for this updater to work.
The following is the software package for Dr. Engrave v2.68.
This is the updater for Dr. Engrave ver. 2.72. A previous version of Dr. Engrave is required for this updater to work.
Software updater for Modela Player version 4.05.
The following is the plug-in updater v1.04 for Rhino 4.0 . In order to use this upgrade you must have the software application installed.
The following is the plug-in updater v1.06 for Rhino 3.0 . In order to use this upgrade you must have the software application installed.
This is the software package zip file for SFEdit2 and supports R-WearStudio and MetazaStudio software only.
The ZIP file contains the Roland library of Single Line Font to be used with Dr. Engrave. Installation instructions are included in this download package.
This is an updater for R-WearStudio ver. 1.32. A previous version of R-WearStudio must be installed for this work.
The following is the software package for Virtual Modela v1.71.
The following is the updater for Virtual Modela v1.71. In order to use this upgrade you must have the software application installed.
Training Videos ( 17 )
The following is a basic set-up and operation video for producing ADA Braille signage using Rolands EGX-400 and EGX-600 Engraver. Demonstrated software is CADLinks EngraverLab, and Raster Pen from Accent Signage Systems.
Cutting 3D Objects Created in Rolands 3D Engrave Software
The following is a basic set-up and operation video for diamond scribing using the EGX-400 and EGX-600 Engraver.
Short Flash video showing installation and operation of medallion accessory for Roland MV-1 and MV-2 vises.
Short Flash video showing installation and operation of pen fixture for Roland MX-1 and MV-2 vises for EGX series rotary engravers.
Short Flash video showing proper installation and operation of pin jig accessory for the Roland MV-1 and MV-2 vises for Roland EGX series rotary engravers.
Short Flash video on proper installation and use of the ruler fixture on the Roland MV-1 and MV-2 vises for Roland EGX series rotary engravers.
Short flash video detailing proper installation and setup of the MV-2 vice on the Roland EGX-400 and EGX-600 Rotary Engraver.
The following is a basic set-up and operation video for plastic engraving using the EGX-400 and EGX-600 Engraver.
Follow this link to the Roland Academy Webinars On-Demand webpage. Then filter through the videos to find a training session that suits your needs.
Basic workflow for producing a Rhinestone motif template using Roland R-WearStudio.
Setup and Basic Use of Rolands 3D Engrave Software
Using Rolands 3D Engrave Software
The following video outlines how to vectorize a graphic for rhinestone placement using Roland R-WearStudio.
The following video outlines how to vectorize a graphic using Roland Dr. Engrave.
The following video outlines how to install a Windows 7 compatible USB driver via the plug and play method.
The following video outlines how to install a true Windows 7 print driver using the pre-installation method.
Troubleshooting Guides ( 1 )
Tips and Tricks- getting to know your engraver cutters PDF
Utilities ( 1 )
This progrom allows you to send prn, rml, plt or firmware files to your Roland device.
Knowledge Base Articles ( 13 )
HELP!! I can't find the driver I need for my Roland!
The cut path is being clipped on one side of the print
EGX Series:Daily Care And Maintenance
What are the consumables on the EGX-400 & EGX-600. Is therea life expectancy for each of these items?
What is the cutting area for each of these models?
Users PC crashed and he was unable to open old Engrave lab projects with his new PC
How to install a Roland driver in Windows 7 and Windows Vista
HELP!! I can't find a Windows 7 driver for my machine!!
HELP!! I can't find a Windows8 driver for my machine!!
Information about my legacy product
Can I use either of these cleaning cartridges interchangeably?
When outputting a design to your engraver or milling machine, the software needs to be able to translate commands to the device. These commands tell the machine how fast to mill, at what revolutions per minute (RPM), and where to mill in 3D space. This is what makes up a toolpath. A Strategy is a combination of tool movements, material properties, software algorithms, and tool characteristics.
Why can't I connect my Roland unit to my new computer? I have a parallel to USB adapter