Base de conocimientos Article
SOLJET Pro III XC-540 54" Eco-Solvent Inkjet Printer/Cutter
Cargo
Sheet Cutter Not Automatically Engaging Fix
Síntoma
When performing a sheet cut, the mechanism does not automatically engage in order to drop the blade.
Solución
Symptom
When performing a sheet cut, the mechanism does not automatically engage in order to drop the blade.
Cause
Limit Initialization not set correctly, blade not adjusted properly.
Solution
Perform the limit initialization on the machine. Make sure that the cutter carriage moves completely over to the left side of the machine. If the problem persists, adjust the distance of the sheet cuter blade so that it is long enough to cut the sheet.
When performing a sheet cut, the mechanism does not automatically engage in order to drop the blade.
Cause
Limit Initialization not set correctly, blade not adjusted properly.
Solution
Perform the limit initialization on the machine. Make sure that the cutter carriage moves completely over to the left side of the machine. If the problem persists, adjust the distance of the sheet cuter blade so that it is long enough to cut the sheet.
Modificado
May 12, 2020