Base de conocimientos Article
DWX-52DCi 5-Axis Dental Milling Machine With Automatic Disc Changer
Cargo
Tool Sensor Maintenance
Síntoma
The following procedure will outline the process of how to clean and ensure the tool sensor is working properly
Solución
Location of the Bur Sensor Striker
Clean the entire ATC assembly using alcohol
Clean the entire ATC assembly using alcohol
Clean the Correction Bush. Ensure
Clean the clamp assembly
Clean the Bur Sensor Striker
Use an electronic cleaner, lightly spray on the striker
Press down on the striker and inspect the way it bounces in to position
Perform this test a couple of time to ensuring material waste is not bonding the striker
Using a lint free rag, wipe down the entire assemblies
Contamination of the compressed air by foreign material is undesirable. Use an oil-free compressor
Moist air may cause rust. Use a device equipped with a dryer.
Modificado
June 17, 2022