Article | Roland

DWX-52DC 5-Axis Dental Milling Machine With Automatic Disc Changer

Cargo
Tool Sensor Maintenance
Síntoma
The following procedure will outline the process of how to clean and ensure the tool sensor is working properly
Solución
Location of the Bur Sensor Striker
Striker.jpg

Clean the entire ATC assembly using alcohol
1.jpg

Clean the Correction Bush. Ensure
 2.jpg

Clean the clamp assembly
 7.jpg

Clean the Bur Sensor Striker
5.jpg

Use an electronic cleaner, lightly spray on the striker
 10.jpg

Press down on the striker and inspect the way it bounces in to position
Press down.jpg

Perform this test a couple of time to ensuring material waste is not bonding the striker

Using a lint free rag, wipe down the entire assemblies
16.jpg

Contamination of the compressed air by foreign material is undesirable. Use an oil-free compressor

Moist air may cause rust. Use a device equipped with a dryer.
Modificado
June 17, 2022