Article | Roland
Knowledge Base Article

SOLJET Pro II SJ-540 54" Eco-Solvent Inkjet Printer

Title
My Roland printer is reading the full width of the platen
Symptom
My Roland printer is reading the full width of the platen bed even though I loaded a smaller roll
Cause
​The setting in the user menu (sheet type) could be incorrect
Solution
Make sure that media type is not set to clear, it should be set to opaque.  If it is set to clear the default width would be set to the maximum platen bed width.
Applies To
RE-640, RF-640, RS-540, RS-640, SJ-540, SJ-540EX, SJ-640EX, SJ-645EX, SJ-740, SJ-740EX, SJ-745EX, XJ-540, XJ-640, XJ-740
Modified
January 18, 2019