Knowledge Base Article
SOLJET Pro II SJ-1045 104" Eco-Solvent Inkjet Printer
Title
The edges are lifting on my WallFlair Vinyl
Summary
I printed and cut my graphics. After a day of installation, the edges are lifting. I even cleaned my walls before installation.
Details
Symptom
I printed and cut my graphics. After a day of installation, the edges are lifting. I even cleaned my walls before installation.
Cause
Vinyl was cut at full bleed.
Solution
An unprinted border is needed around the printed graphics if you're going to do a contour cut. The only wall product that you can contour cut at full bleed is WallFlair fabric.
I printed and cut my graphics. After a day of installation, the edges are lifting. I even cleaned my walls before installation.
Cause
Vinyl was cut at full bleed.
Solution
An unprinted border is needed around the printed graphics if you're going to do a contour cut. The only wall product that you can contour cut at full bleed is WallFlair fabric.
Modified
May 13, 2020