Article | Roland
Knowledge Base Article

Modela Pro II MDX-540 3D Milling Machine

Title
Mounting for the MDX-540 T slot table
Symptom
​Work piece is not raised high enough to be milled when using the MDX-540 T slot table (ZZTT-540).
Cause
​Z travel is maxed out on the spindle.
Solution
The T-slot table is just the base for mounting other 3rd party vises or fixtures. The options are pretty endless on what you can attach. These attachments are what raise the work piece up to the spindle.
Applies To
MDX-540, MDX-540A, MDX-540S, MDX-540SA
Modified
June 17, 2014