DWX-53DC Dry Dental Milling Machine
Checking the Included Items
The following items are included with the machine. Make sure they are all present and accounted for.
Power cord, power plug adapter (1 each) | 
USB cable (1) | 
Regulator (1) Drain hose (1) | 
Air hose (1) |
Adapter (6) | 
Automatic correction jig (1) | 
Pin-type workpiece adapter (1) | 
Open edge adapter (1) *1 |
Milling bur positioner (1) | 
Milling bur holder (15) | 
Detection pin (1) | 
Tool rack (1) |
Collet attaching/detaching jig (1) | 
T-shaped hexagonal screwdriver (1) | 
L-shaped hexagonal wrench (1) | 
Brush (1) |
Mounting screws (25) | 
Screws (adapter spare; 8) | 
Screws (pin-type workpiece adapter spare; 2) | 
Black screws (for the regulator; 4)
|
Cloth for care (1) | 
Milling burs (4)*2 | 
Torque screwdriver*3 | |
Right tablet holder (1) Screw (1) | 
Left tablet holder (1) Screw (1) | 
Adapter rack (1) | 
Cushions (for tablet; 4) |
Adapter ID labels (optional; 1)*4 | 
Quick Access Guide (1) | 
Safety Precautions (1) | |
*1 Affix an (optional) adapter ID label to the adapter base before using this adapter. You can use any adapter ID label number.
*2 ZRB-200D, ZPB-100D, ZPB-50D, and ZPB-30D (1 each)
*3 Handles (2), bits (1.5 mm [0.06 in.], 2.5 mm [0.1 in.], and 3.0 mm [0.12 in.]; 1 each), and sleeves (0.3 N·m, 0.6 N·m; 1 each)
*4 Use these labels when you have purchased optional adapters.
IMPORTANT
When using the torque screwdriver with a sleeve attached, do not loosen screws that have been tightened with a torque greater than or equal to the value on the sleeve. Doing so may damage the sleeve.